MODIFICACIÓN SUPERFICIAL DE SÍLICE MESOPOROSA PARA ADSORCIÓN DE CO2
DOI:
https://doi.org/10.17533/udea.rcm.19336Keywords:
Silica, Modification, Adsorption, CO2Abstract
Impregnation of nitrogen compounds is one of the most widely used techniques for modifying basic groups in adsorbent materials, generating increased of CO2 adsorption capacity. In this paper we study the impregnation process of nitrogen compounds on silica powders. The mesoporous silica powders were synthesized by sol-gel method, using sodium silicate as silica source, and cetyl trimethyl ammonium bromide (CTAB) as the structure directing agent. The silica powders were prepared by excess wet impregnation with two nitrogen compounds, hydroxypyridine and urea.The surface area and pore size distribution was determined by physisorption of N2 (-176ºC) obtaining surface area of the samples between 340-600 m2/g, pore volume between 0,20–0,80 cm3/g and pore diameter between 6-10nm. The morphology was analized by SEM and structural properties were studied by FTIR and DRX.Surface modification of the mesoporous silica with urea and hydroxypyridine allows increased CO2 adsorption capacity compared to mesoporous silica powders unimpregnated.
Downloads
References
Ana Patricia Noguera de Echeverri, “Preludio en tono menor:Emergencias del Pensamiento ambiental,” ISEEPublicaciòn Ocasional, pp. 1–9, 2009.
M. G. Plaza, C. Pevida, a. Arenillas, F. Rubiera, and J. J. Pis, “CO2 capture by adsorption with nitrogen enriched carbons,” Fuel, vol. 86, no. 14, pp. 2204–2212, 2007.
M. Sugiyama, “Climate change mitigation and electrification,” Energy Policy, vol. 44, pp. 464–468, 2012.
Z. Yong, V. Mata, and a Rodrigues, “Adsorption of carbon dioxide at high temperature - A review,” Separation and Purification Technology, vol. 26, no. 2–3, pp. 195–205, 2002.
A. L. Chaffee, G. P. Knowles, Z. Liang, J. Zhang, P. Xiao, and P. a. Webley, “CO2 capture by adsorption: Materials and process development,” International Journal of Greenhouse Gas Control, vol. 1, no. 1, pp. 11–18, 2007.
J. a. Thote, K. S. Iyer, R. Chatti, N. K. Labhsetwar, R. B. Biniwale, and S. S. Rayalu, “In situ nitrogen enriched carbon for carbon dioxide capture,” Carbon, vol. 48, no. 2, pp. 396–402, 2010.
C. Pevida, T. C. Drage, and C. E. Snape, “Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture,” Carbon, vol. 46, no. 11, pp. 1464–1474, 2008.
Y. Zhou, X. Li, and Z. Chen, “Rapid synthesis of well-ordered mesoporous silica from sodium silicate,” Powder Technology, vol. 226, pp. 239–245, 2012.
Z.-G. Shi, Y.-Q. Feng, L. Xu, S.-L. Da, and Y.-Y. Ren, “Synthesis of a silica monolith with textural pores and ordered mesopores,” Microporous and Mesoporous Materials, vol. 68, no. 1–3, pp. 55–59, 2004.
Z. Zhang and Y. Wang, “Development of silica-gel-supported polyethylenimine sorbents for CO2capture from flue gas,” vol. 58, no. 8, pp. 22–27,2012.
R. L. Derosa and J. A. Trapasso, “Poly ( ethylene glycol ) interactions with alumina and silica powders determined via DRIFT,” Journal of Materials Science, vol. 7, pp. 1079–1082, 2002.
E. R. Monazam, L. J. Shadle, D. C. Miller, H. W. Pennline, D. J. Fauth, J. S. Hoffman, and M. L. Gray, “Equilibrium and kinetics analysis of carbon dioxide capture using immobilized amine on a mesoporous silica,” AIChE Journal, vol. 59, no. 3, pp. 923-935, 2013.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Revista Colombiana de Materiales

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.