Desde la planeación hasta la fabricación de prótesis de cadera personalizadas por manufactura aditiva de metales

John Dairo Henao Penenrey; Jorge Corona Castuera; Daniela Rodríguez Delgado; Carlos Agustín Poblano Salas

doi:10.17533/udea.rcm.n16a03

Autores/as

John Dairo Henao Penenrey Consejo Nacional de Ciencia y Tecnología (CONACYT), Centro de Tecnología Avanzada A. C. ( CIATEQ)
Jorge Corona Castuera Centro de Tecnología Avanzada A. C. ( CIATEQ)
Daniela Rodríguez Delgado Centro de Tecnología Avanzada A. C. ( CIATEQ)
Carlos Agustín Poblano Salas Centro de Tecnología Avanzada A. C. (CIATEQ)

DOI:

https://doi.org/10.17533/udea.rcm.n16a03

Palabras clave:

manufactura aditiva, prótesis de cadera, personalización, diseño

Resumen

La artroplastia total de cadera es uno de los procedimientos quirúrgicos más comunes a nivel mundial en pacientes adultos; este procedimiento implica el reemplazo de la cadera por un implante cuyo objetivo es restablecer la movilidad de la extremidad afectada. La planeación de la intervención quirúrgica, así como el diseño de la prótesis son fundamentales para el éxito del implante. El presente trabajo presenta una revisión de la planeación, diseño y selección de una prótesis de cadera, así como de la consecución de una prótesis personalizada hoy en día posible gracias a las técnicas de manufactura aditiva.

|Resumen

= 1027 veces | PDF

= 1903 veces|

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

John Dairo Henao Penenrey, Consejo Nacional de Ciencia y Tecnología (CONACYT), Centro de Tecnología Avanzada A. C. ( CIATEQ)

Catedrático, CONACYT - CIATEQ.

Jorge Corona Castuera, Centro de Tecnología Avanzada A. C. ( CIATEQ)

Investigador, CIATEQ A.C.

Daniela Rodríguez Delgado, Centro de Tecnología Avanzada A. C. ( CIATEQ)

Ingeniera Biomédica, CIATEQ A.C.

Carlos Agustín Poblano Salas, Centro de Tecnología Avanzada A. C. (CIATEQ)

Investigador, CIATEQ A.C.

Citas

Kalaskar, Deepak M. (ed.). “3D printing in medicine”. Woodhead Publishing, 2017.

Brandt, Milan (ed.). “Laser additive manufacturing: materials, design, technologies, and applications”. Woodhead Publishing, 2016.

Cronskär, Marie. “On customization of orthopedic implants-from design and additive manufacturing to implementation”.2014. Tesis Doctoral. Kopieringen, Mid Sweden University.

Georgios Tsoulfas, Petros I. Bangeas, Jasjit Suri, “3D Printing: Applications in Medicine and Surgery”,Elsevier, 1a Ed., 2019.

Shapií, A., Sulaiman, R., Hasan, M. K., Prabuwono, A. S., & Kassim, A. Y. M. “Digital two dimensional (2D) implant design for pre-operative planning in Total hip Arthroplasty”. International Journal on Electrical Engineering and Informatics, 4(1), 67, 2012.

Shichman, I., Factor, S., Shaked, O., Morgan, S., Amzallag, N., Gold, A., et al. “Effects of surgeon experience and patient characteristics on accuracy of digital pre-operative planning in total hip arthroplasty”.International Orthopaedics, 1-6, 2020.

Eggli, S., Pisan, M., & Müller, M. E. “The value of preoperative planning for total hip arthroplasty”. The Journal of bone and joint surgery. British volume, 80(3), 382-390, 1998.

Bono, J. V. “Digital templating in total hip arthroplasty”. JBJS, 86 (suppl_2), 118-122, 2004.

Bayne, C. O., Krosin, M., & Barber, T. C. “Evaluation of the accuracy and use of x-ray markers in digital templating for total hip arthroplasty”.The Journal of arthroplasty, 24(3), 407-413, 2009.

Della Valle, A. G., Comba, F., Taveras, N., & Salvati, E. A. “The utility and precision of analogue and digital preoperative planning for total hip arthroplasty”.International orthopaedics, 32(3), 289-294, 2008.

Holzer, L. A., Scholler, G., Wagner, S., Friesenbichler, J., Maurer-Ertl, W., & Leithner, A. “The accuracy of digital templating in uncemented total hip arthroplasty”. Archives of Orthopaedic and Trauma Surgery, 139(2), 263-268, 2017.

Kosashvili, Y., Shasha, N., Olschewski, E., Safir, O., White, L., Gross, A., & Backstein, D. “Digital versus conventional templating techniques in preoperative planning for total hip arthroplasty”. Canadian Journal of Surgery, 52(1), 6, 2009.

Konyves, A., & Bannister, G. C. “The importance of leg length discrepancy after total hip arthroplasty”.The Journal of bone and joint surgery. British volume, 87(2), 155-157.

Sariali, E., Mauprivez, R., Khiami, F., Pascal-Mousselard, H., & Catonné, Y. “Accuracy of the preoperative planning for cementless total hip arthroplasty. A randomised comparison between three-dimensional computerised planning and conventional templating”. Orthopaedics & Traumatology: Surgery & Research, 98(2), 151-158, 2012.

Knafo, Y., Houfani, F., Zaharia, B., Egrise, F., Clerc-Urmès, I., & Mainard, D. “Value of 3D Preoperative planning for primary total hip arthroplasty based on biplanar weightbearing radiographs”. BioMed Research International, 2019.

Salem, H. S., Marchand, K. B., Ehiorobo, J. O., Tarazi, J. M., Matzko, C. N., Sodhi, N., et al. “Benefits of CT Scanning for the Management of Hip Arthritis and Arthroplasty”. Surgical Technology International, 36, 2020.

Kobayashi, H., Cech, A., Kase, M., Pagenstart, G., Carrillon, Y., O’Loughlin, P. F., et al. “Pre-operative templating in THA. Part II: a CT-based strategy to correct architectural hip deformities”.Archives of Orthopaedic and Trauma Surgery, 1-12, 2020.

Yi, L. H., Li, R., Zhu, Z. Y., Bai, C. W., Tang, J. L., Zhao, F. C., et al. “Anatomical study based on 3D-CT image reconstruction of the hip rotation center and femoral offset in a Chinese population: preoperative implications in total hip arthroplasty”. Surgical and Radiologic Anatomy, 41(1), 117-124. 2019.

Carter, L. W., Stovall, D. O., & Young, T. R. “Determination of accuracy of preoperative templating of noncemented femoral prostheses”.The Journal of arthroplasty, 10(4), 507-513, 2005.

Knight, J. L., & Atwater, R. D. “Preoperative planning for total hip arthroplasty: quantitating its utility and precision”. The Journal of arthroplasty, 7, 403-409, 1992.

Ahmad R, Sharma V, Sandhu H, Bishay M. “Leg length discrepancy in total hip arthroplasty with the use of cemented and uncemented femoral stems. A prospective radiological study”. Hip Int; 19:264—7, 2009.

Sariali, E., & Knaffo, Y. “Three-dimensional analysis of the proximal anterior femoral flare and torsion. Anatomic bases for metaphyseally fixed short stems design”.International Orthopaedics, 41(10), 2017.

Zeng, C., Xing, W., Wu, Z., Huang, H., & Huang, W. “A combination of three-dimensional printing and computer-assisted virtual surgical procedure for preoperativeplanning of acetabular fracture reduction”.Injury, 47(10), 2223-2227, 2016.

Ganguli, A., Pagan-Diaz, G. J., Grant, L., Cvetkovic, C., Bramlet, M., Vozenilek, J., et al. “3D printing for preoperative planning and surgical training: a review”.Biomedical microdevices, 20(3), 65, 2018.

Tsoulfas G., Petros I. Bangeas, Jasjit Suri, “3D Printing: Applications in Medicine and Surgery”. Elsevier, 1a Ed., 2019.

Lorna J.G., Michael F.A. “Cellular Solids. Structure and Properties”(Cambridge Solid State Science Series). Cambridge University Press. 2-26, 1999.

Schoen, A. H. “Infinite Periodic Minimal Surfaces Without Self-Intersection”.National Aeronautics and Space Administration (NASA) Tech, Washington, DC (Note no. D-5541), 1970.

Hussein, A., Hao, L., Yan, C. et al. “Advanced lattice support structures for metal additive manufacturing”.Journal of Materials Processing Technology, 213. Pp 1019-1026, 2013.

Schileo, E., Dall ́Ara, E., et al.“An accurate estimation of bone density improves the accuracy of subject-specific finite element models”. Journal of Biomechanics, 41. Pp 2483-2491, 2008.

Kaneko, T.S. Bell, J.S., Pejcic, M.R., et al. “Mechanical properties, density and quantitative CT scan data of trabecular bone with and without metastases”.J. Biomech, 37(4). Pp 523-530, 2004.

Deepak MK. “3D Printing in Medicine”. Elsevier. Chapters 1, 2. 1-42, 2017.

Duan B., Wang M., Zhou WY., Cheung WL., Li ZY., Lu WW. “Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering”.Acta Biomater. 6(12): 4495-505, 2010.