.

Reza Jamshidi Rodbari; Lourdes Cristina Lucena Agostinho Jamshi; Luciano Nascimento; David Arsenio Landinez Téllez; Eduardo Padrón Hernández

doi:10.17533/udea.rcm.24754

Authors

Reza Jamshidi Rodbari Centro de Ciências Exatas e da Natureza-CCEN/UFPE
Lourdes Cristina Lucena Agostinho Jamshi Centro de Tecnologia e Geociências-CTG/UFPE.
Luciano Nascimento Centro de Tecnologia e Geociências-CTG/UFPE.
David Arsenio Landinez Téllez Centro de Ciências Exatas e da Natureza-CCEN/UFPE
Eduardo Padrón Hernández Centro de Ciências Exatas e da Natureza-CCEN/UFPE

DOI:

https://doi.org/10.17533/udea.rcm.24754

Keywords:

Ilmenite, X-Ray Diffraction, Scanning Electron Microscopy, Ionic Species

Abstract

The mineral ilmenite (FeTiO3) is an oxide of iron and titanium and abundant most common occurrence, and with theoretical composition of Fe (36,8%), Ti (31,6%), O (31,6%) and the colour features ilmenite iron, rhom

bohedral and hexagonal crystallization. The oxidation of mineral ilmenite is common and due to this, there occurs the transformation of Fe2+ to Fe3+. A crystalline form of ilmenite changes into an amorphous mixture FeO, Fe2O3 and TiO2, because of the weathering this process is very slow. This work shows a study on the main characteristics of the chemical and physical. Properties of ilmenite, being related by acrystallographic model of the mineral, and the ionic species in this sample. In this article the experimental techniques are used for characterization of X-ray diffraction, electron microscopy and Energy Dispersive Spectroscopy (EDS). The obtained sample, made by the technique of X-ray diffraction, has the concentrations of the compounds ilmenite 67.4%, 26,9% in PseudoRutile and 5,7% in Pseudobrookite.In close cooperation with Rietveld, it

became possible to quantify the refinement of the existing phases in the sample, as well as showing the peaks that match the pattern of dispersion in structures. The integration of obtained data from SEM and EDS was essential for the characterization of ilmenite.

|Abstract

= 184 veces | PDF (ESPAÑOL (ESPAÑA))

= 404 veces|

Downloads

Download data is not yet available.

Author Biographies

Reza Jamshidi Rodbari, Centro de Ciências Exatas e da Natureza-CCEN/UFPE

Graduate Program in Material Sciences-PPGCMTR, Center for Exact and Nature Sciences-CCEN/UFPE.

Lourdes Cristina Lucena Agostinho Jamshi, Centro de Tecnologia e Geociências-CTG/UFPE.

Graduate Program in Chemical Engineering-PPGEQ, Technology and Geosciences Center-CTG/UFPE.

Luciano Nascimento, Centro de Tecnologia e Geociências-CTG/UFPE.

Graduate Program in Chemical Engineering-PPGEQ, Technology and Geosciences Center-CTG/UFPE.

David Arsenio Landinez Téllez, Centro de Ciências Exatas e da Natureza-CCEN/UFPE

Graduate Program in Material Sciences-PPGCMTR, Center for Exact and Nature Sciences-CCEN/UFPE.

Eduardo Padrón Hernández, Centro de Ciências Exatas e da Natureza-CCEN/UFPE

Graduate Program in Material Sciences-PPGCMTR, Center for Exact and Nature Sciences-CCEN/UFPE.

References

Fan, X.; E Rowson, N. A., “The effect of Pb(NO3)2 on ilmenite flotation”,Minerals Engineering, Vol.13, No.2, pp.205-215, 2000.

Doriguetto, A. C.; Fernades, N. G.; et al., Phys. Chem. Miner., Vol. 30, No. 249, 2003.

Tang X.; Hu K., “The formation of ilmenite FeTiO3 powders by a novel liquid mix and H2/H2O reduction process”, Journal of Materials Science, No. 41, Vol 23, pp. 8025−8028, 2006.

Alves , M. E. et al. “Rietveld based mineralogical quantitation of deferrified oxisol clays”, Soil Research, Vol.45, pp. 224-232, 2007.

Fu-Xiao, W. Y.; Wei F. “Phase transitions and reaction mechanism of ilmenite oxidation”, Metallurgical and Materials Transactions A, No. 41, Vol 5, pp. 1338−1348. 2010.

Miranda, J.M., Introdução ao Geomagnetismo, Univ. Lisboa, pp. 53, 1990.

P. W. C. Sarvezuk, “Estudo da Moagem de Alta-Energia do Sistema Fe-TiO2”, Dissertação (Mestrado em Física), Universidade Estadual de Maringá, pp.80, Brasil, 2007.

Chen, S. W.; Huang,M. J.; et al., “Orbital structure of FeTiO3 ilmenite investigated with polarization-dependent X-ray absorption spectroscopy and band structure calculations”, Applied Physics Letters, No. 102, 042107, 2013.

Fujii, T.; Kayano, M.; et al., “Preparation and characterization of epitaxial FeTiO3+δfilms”, Journal of Magnetism and Magnetic Materials, 2004, pp. 272−276, 2010−2011.

Wilson,N. C. ; Muscat,J. ; et al., “Structure and properties of ilmenite from first principles” Physical Review, B 71, 075202 s2005d.

Zhang G, Ostrovski O. “Effect of preoxidation and sintering on properties of ilmenite concentrates [J]”, International Journal of Mineral Processing, No. 64: pp.201−218, 2002.

Nascimento,L. ; Agostinho,L.C.L. ; et al., “Grouping Model in Fermi Surface Applied to Quasicrystals”, Revista Colombiana de Materiales, Vol. 3, pp. 55-62, 2012.