No. 14 (2019)

View No. 14 (2019)
Published: 2019-12-19

Artículos

  • Wood as a new sustainable material

    Asdrúbal Valencia Giraldo
    1-16
    |Abstract
    = 974 veces | PDF (ESPAÑOL (ESPAÑA))
    = 2187 veces|
    DOI: https://doi.org/10.17533/udea.rcm.340836

  • Assessment of amphibolite and pegmatite aggregates for the manufacture of concrete

    Andrea González Ruiz, Edwin Alexander Villa Plazas, Carlos Alberto Ríos Reyes
    17-39
    |Abstract
    = 371 veces | PDF (ESPAÑOL (ESPAÑA))
    = 893 veces|
    DOI: https://doi.org/10.17533/udea.rcm.340840

  • Effect of Zr grain refinment on the tensil and hardness properties of the system Cu8Sn ̈as-cast ̈ under standart test ASTM B208-140

    Moisés David Vásquez Romero, Marco Aurelio Paniagua Villa, Juan Marcelo Rojas Arango
    40-51
    |Abstract
    = 287 veces | PDF (ESPAÑOL (ESPAÑA))
    = 580 veces|
    DOI: https://doi.org/10.17533/udea.rcm.340841

  • Comparison of experimental and computational procedures for the evaluation of polymer matrix composites

    Jaime Andrés Vélez Zea, Manuel Ignacio Zapata Londoño, Juan Santiago Villegas López, Leidy Selene Alzate Acosta, Katherine Pérez Zapata, Franklin Jaramillo Isaza
    52-65
    |Abstract
    = 227 veces | PDF (ESPAÑOL (ESPAÑA))
    = 332 veces|
    DOI: https://doi.org/10.17533/udea.rcm.340842

  • Determination of setting time of cement-based hydroxyapatite and galactomannan extracted from Adenanthera pavonina L. seeds by the resonant cavity method

    Lídia Raquel Correia de Aquino, Ana Angélica Mathias Macêdo, Cleber Candido Silva
    66-80
    |Abstract
    = 528 veces | PDF (ESPAÑOL (ESPAÑA))
    = 98 veces|
    DOI: https://doi.org/10.17533/udea.rcm.340843

  • South American pre hispanic Au-Pt alloys from the metallurgical science and engineering

    Las aleaciones sudamericanas prehispánicas de Au-Pt desde la ciencia e ingeniería metalúrgicas Salas Banuet, José G. Ramírez Vieyra, María Eugenia Noguez Amaya
    81-101
    |Abstract
    = 318 veces | PDF (ESPAÑOL (ESPAÑA))
    = 1235 veces|
    DOI: https://doi.org/10.17533/udea.rcm.339787

  • Characterization of not activated and activated minerals for their potential use as sorbents

    Ana Senese Leiva, Natalia Alejandra Hidalgo Rattá, Ester Cano, Luis Cañari
    102-116
    |Abstract
    = 385 veces | PDF (ESPAÑOL (ESPAÑA))
    = 1247 veces|
    DOI: https://doi.org/10.17533/udea.rcm.340844

  • Evaluation of mechanical properties in carbon/epoxy composites with different curing parameters

    Mariana H. F. Fonseca, Cândido J. S. Lobo, Arthur V. N. A. Lima, Fabrício J. N. Cavalcante, Jorge L. Cardoso , Zoroastro T. Vilar
    117-128
    |Abstract
    = 197 veces | PDF (ESPAÑOL (ESPAÑA))
    = 216 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342159