No. 15 (2020)

View No. 15 (2020)
Published: 2020-05-18

Artículos

  • Research and technology on high performance upshilstery fabrics coated by transferred polymers

    Mayka Bautista, Juliana Lasprilla-Botero, Julieth Mendez, John Álvarez, Alfredo Forero, Ricardo Santana
    1-7
    |Abstract
    = 983 veces | PDF (ESPAÑOL (ESPAÑA))
    = 1000 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342050

  • Development of low environmental impact concrets from silico-aluminous mine tailings alkali activated

    Nicolás Pardo, Francy Hurtado, Duván Agudelo, Guillermo Penagos, Mauricio Correa, Esperanza López
    8-19
    |Abstract
    = 791 veces | PDF (ESPAÑOL (ESPAÑA))
    = 316 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342051

  • Characterization of paste and mortar geopolymer containing SiC nanowhiskers

    Madeleing Taborda-Barraza, Philippe Jean Paul Gleize, Natalia Prieto-Jiménez
    20-26
    |Abstract
    = 202 veces | PDF (ESPAÑOL (ESPAÑA))
    = 140 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342052

  • SOLIDCast® aided optimization of manufacturing conditions of tension test specimens for copper alloy Cu-8%Sn (AS-CAST)

    Daniel Ramírez, Juan Marcelo Rojas, Lizeth Giraldo
    27-33
    |Abstract
    = 359 veces | PDF (ESPAÑOL (ESPAÑA))
    = 275 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342053

  • Effect of the rheaologycal behavior of alumina suspensions used for the manufacturing of crucibles by collage technique

    Juan Fernando Hernández Ruiz, María Camila Corrales Agudelo, María Esperanza López Gómez
    34-42
    |Abstract
    = 380 veces | PDF (ESPAÑOL (ESPAÑA))
    = 362 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342054

  • Glass foams and PVB based polymer coatings obtained from laminated glass waste and flying ashes

    Cristian Rodríguez, Ángel Manuel Meléndez
    43-50
    |Abstract
    = 895 veces | PDF (ESPAÑOL (ESPAÑA))
    = 475 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342055

  • Study of prototypes of ceramic bricks prototypes made from gold mining residues

    Daniel Zuluaga, Esperanza López, Milton Pérez, Mauricio Correa
    51-63
    |Abstract
    = 583 veces | PDF (ESPAÑOL (ESPAÑA))
    = 417 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342056

  • Analysis of the mechanical behavior of latex resistance bands as substitutes of human skin in mechanical test

    Juan Gustavo Diosa, Manuel Antonio Guzmán, Edwin Lenin Chica, Ricardo Moreno
    64-69
    |Abstract
    = 427 veces | PDF (ESPAÑOL (ESPAÑA))
    = 299 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342057

  • Influence of the starting microstructure and chemical composition on the obtaintion of ferritic and pearlitic matrices in nodular irons

    Harold Machado, Mateo Montoya, Ricardo Aristizábal
    70-78
    |Abstract
    = 341 veces | PDF (ESPAÑOL (ESPAÑA))
    = 338 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342060

  • Evaluation of the mechanical behavior of an adhesive anaerobic joint designed for the chassis of a single cycle

    Andrea Lucía Zapata Amaris, Andrés Felipe Castro Gil, Luis Fernando Gil Bedoya, Germán Leonardo García Monsalve, Nelson Antonio Vanegas Molina
    79-86
    |Abstract
    = 284 veces | PDF (ESPAÑOL (ESPAÑA))
    = 188 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342061

  • Rotating bending fatigue of a carbo-austempered cast steel

    Oscar Eduardo Ríos Díez, Claudia Patricia Serna Giraldo, Ricardo Emilio Aristizábal Sierra, Laura Vargas
    87-92
    |Abstract
    = 398 veces | PDF (ESPAÑOL (ESPAÑA))
    = 311 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342062

  • Evaluation of the mechanical properties of the Cu-8Sn allow refined with zirconia

    Marco Aurelio Paniagua Villa, Juan Marcelo Rojas Arango
    93-99
    |Abstract
    = 226 veces | PDF (ESPAÑOL (ESPAÑA))
    = 248 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342064

  • Functionalization and characterization of a zirconia-based material for the adsorption of CO2

    María Pereira, Wander Vasconcelos, Débora Guimarães, Jéssica Notório
    100-105
    |Abstract
    = 350 veces | PDF (ESPAÑOL (ESPAÑA))
    = 266 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342065

  • Study of the microstructural evolution of AISI A1 steel under austempering and Quenching and Q&P isothermal treatments

    Jheison Andrés Tobón Aguirre, Claudia Patricia Serna Giraldo, Oscar Eduardo Ríos Diez
    106-112
    |Abstract
    = 468 veces | PDF (ESPAÑOL (ESPAÑA))
    = 678 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342066

  • Mechanical and microstructural evaluation of a low cast steel under carbon isotermally heat treatment

    Laura Vargas, Oscar Eduardo Ríos Díez, Claudia Patricia Serna Giraldo, Ricardo Emilio Aristizábal Sierra
    113-119
    |Abstract
    = 364 veces | PDF (ESPAÑOL (ESPAÑA))
    = 537 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342067

  • Tribological evaluation of a carbo-alloyed cast steel subjected to the disc-disc test

    Sebastián Rivera Grisales, Oscar Eduardo Ríos Díez, Claudia Patricia Serna Giraldo, Ricardo Emilio Aristizábal Sierra
    120-126
    |Abstract
    = 289 veces | PDF (ESPAÑOL (ESPAÑA))
    = 219 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342068

  • Methodological proposal for the construction and assembly of a Go Kart chassis prototype under the CIK/FIA standard using hybrid joints

    Daniel Alejandro Portilla Enríquez, Luis Fernando Gil Bedoya, Mauricio Arango Correa, Juan Pablo Jiménez Ramírez, Nelson Antonio Vanegas Molina, Germán Leonardo García Monsalve
    127-135
    |Abstract
    = 993 veces | PDF (ESPAÑOL (ESPAÑA))
    = 803 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342069

  • Influence of the applied load on the wear behavior of nanostructured austempered ductile iron alloyed with copper and nickel

    Ximena Ospina Arrubla, Mateo Montoya Mejía, Harold David Machado, Ricardo Emilio Aristizábal Sierra
    136-143
    |Abstract
    = 288 veces | PDF (ESPAÑOL (ESPAÑA))
    = 156 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342070

  • Study of electrochemical behavior of galvanized steel sheets covered with paintings exposed to a simulated salt environment

    Luisa Fernanda Melgarejo Lizcano, Jefferson Bolaños Sierra, Jharold Navarro, Darío Yesid Peña Ballesteros
    144-151
    |Abstract
    = 440 veces | PDF (ESPAÑOL (ESPAÑA))
    = 377 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342071

  • Al2O3-TiO2 coating deposition by means of oxyacetylene flame spray with carbon nanotubes in the coating structure

    Edwin Humberto Cadavid Iglesias, Marysol Sepúlveda, Geraldin Estrada Zapata, María Esperanza López Gómez, Fabio Vargas Galvis
    152-161
    |Abstract
    = 426 veces | PDF (ESPAÑOL (ESPAÑA))
    = 392 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342072

  • Production of nanostructured ausferrite in alloyed and non-alloyed ductile iron

    Mateo Montoya Mejía, Ricardo Emilio Aristizábal Sierra, Harold David Machado González
    162-172
    |Abstract
    = 345 veces | PDF (ESPAÑOL (ESPAÑA))
    = 276 veces|
    DOI: https://doi.org/10.17533/udea.rcm.342073