Fuzzy Control of velocity for a hidrostatic transmision
DOI:
https://doi.org/10.17533/udea.redin.18510Keywords:
Hidrostatic transmision (TH), data acquisition (DAQ)Abstract
This article describes the design and implementation of a velocity control system for a hydrostatic transmission with a variable displacement pump and fixed motor hidraulic engine of the Oleoneumatic Laboratory at the Faculty of Fisico-mecanicas Engineering of the Universidad Autónoma de Bucaramanga. This control system maintains a constant velocity on the transmission with different loading conditions. It was implemented using Labview 7.0 and a NI6008-USB data acquisition device.
Downloads
References
C. Smith. Control Automático de Procesos Teoría y Práctica. Ed. Limusa, S.A. México, D.F. 1991, pp.91- 170.
J. A. Pinzón, J. M. Vega. Diseño E Implementación de Un Sistema de Control en Lazo Cerrado Para Una Transmisión Hidrostática. Tesis de grado. Universidad Autónoma de Bucaramanga. 2005. pp. 30-60.
J. E. Meneses. “Control Fuzzy Basado en PLC’s Simatic S5”. Inteligencia Artificial En El Control de Procesos. Seminario-Taller. Universidad Industrial de Santander. 1997. pp 10-35.
O. Katsuiko. Ingeniería de Control Moderna. 4a Edición. Prentice Hall Hispanoamericana. Ribeira de Liora, Madrid. 2003. pp. 492-594
T. Martinez, J. Montañez, L. Mujica. Manual de Practicas. Universidad Industrial de Santander. Laboratorios de Sistemas de control. 2000. pp.25-30.
A. Delgado. Inteligencia Artificial y Minirobots. Ecoe Ediciones. Bogotá. 1998. pp.169-190.
U. Eronini Dinámica de sistemas y control. Thomson Learning. New York. 1993 pp.30-50.
D. A. Tibaduiza, C. E. Daza. Control de velocidad para una transmisión hidrostática usando lógica fuzzy. Tesis de grado. Universidad Autónoma de Bucaramanga. 2007. pp. 10-100.
http://www.ni.com/pdf/manuals/322192a.pdf. Consultada en noviembre 30 de 2006.
Downloads
Published
How to Cite
Issue
Section
License
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.