Modelamiento y desarrollo de un rectificador Boost PFC sin puente
DOI:
https://doi.org/10.17533/udea.redin.n82a02Palabras clave:
corrección de factor de potencia (PFC), rectificador sin puente monofásico, modelo matemático, rectificador elevador PFCResumen
Este artículo propone un modelo para rectificadores elevadores PFC (Power Factor Correction por sus siglas en inglés) sin puente para propósitos de control y basado en el análisis del promedio de pequeña señal. A partir de las leyes circuitales, cuatro modos de operación son definidos y explicados, asegurando una relación entre las variables físicas del convertidor. Basados en el modelo propuesto, dos lazos cerrados de control compuestos por controladores lineales Proporcionales e Integrales (PI) son propuestos. Algunas consideraciones de diseño para dimensionar los elementos reactivos son incluidas, de tal forma que se obtienen valores mínimos para su inductancia y capacitancia. Se presenta la implementación de un prototipo de 900 W con resultados experimentales que permite validar y reafirmar el modelo propuesto. Los resultados experimentales demuestran que el uso del convertidor PFC permite elevar el factor de potencia FP a 0,99 o más y reducir el THDi (Total Harmonic Distortion of the Current por sus siglas en Inglés) a 3,9 %, además de controlar el bus DC en la salida. Se verifica experimentalmente que el convertidor PFC desarrollado está de acuerdo con los estándares de calidad de la potencia EN 61000-3-2 (IEC 1000-3-2).
Descargas
Citas
F. Musavi, M. Edington, W. Eberle, and W. G. Dunford, “Evaluation and Efficiency Comparison of Front End AC-DC Plug-in Hybrid Charger Topologies,” IEEE Trans. Smart Grid, vol. 3, no. 1, pp. 413-421, 2012.
M. M. Jovanovic and Y. Jang, “State-of-the-art, single- phase, active power-factor-correction techniques for high-power applications - an overview,” IEEE Trans. Ind. Electron., vol. 52, no. 3, pp. 701-708, 2005.
K. Muhammad and D. Lu, “ZCS Bridgeless Boost PFC Rectifier Using Only Two Active Switches,” IEEE Trans. Ind. Electron., vol. 62, no. 5, pp. 2795-2806, 2015.
N. Muñoz, J. C. Alfonso, S. Orts, S. Seguí, and F. J. Gimeno, “Instantaneous approach to IEEE Std. 1459 power terms and quality indices,” Electr. Power Syst. Res., vol. 125, pp. 228-234, 2015.
Institute of Electrical and Electronics Engineers (IEEE), IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems, IEEE Standard 519, 2014.
Institute of Electrical and Electronics Engineers (IEEE), IEEE Recommended Practice--Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC)--Testing and measurement techniques--Flickermeter--Functional and design specifications, IEEE Standard 1453, 2011.
G. E. Mejía, N. Muñoz, and J. B. Cano, “Modeling, analysis and design procedure of LCL filter for grid connected converters,” in IEEE Workshop on Power Electronics and Power Quality Applications (PEPQA), Bogotá, Colombia, 2015, pp. 1-6.
B. Singh et al., “A review of single-phase improved power quality AC-DC converters,” IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 962-981, 2003.
A. Karaarslan and I. Iskender, “Analysis and comparison of current control methods on bridgeless converter to improve power quality,” Int. J. Electr. Power Energy Syst., vol. 51, pp. 1-13, 2013.
B. Liu, J. J. Wu, J. Li, and J. Y. Dai, “A novel PFC controller and selective harmonics suppression,” Int. J. Electr. Power Energy Syst., vol. 44, no. 1, pp. 680-687, 2013.
V. Bist and B. Singh, “A reduced sensor PFC BL-Zeta converter based VSI fed BLDC motor drive,” Electr. Power Syst. Res., vol. 98, pp. 11-18, 2013.
Q. Ji, X. Ruan, L. Xie, and Z. Ye, “Conducted EMI Spectra of Average-Current-Controlled Boost PFC Converters Operating in Both CCM and DCM,” IEEE Trans. Ind. Electron., vol. 62, no. 4, pp. 2184-2194, 2015.
W. Cheng and C. Chen, “Optimal Lowest-Voltage- Switching for Boundary Mode Power Factor Correction Converters,” IEEE Trans. Power Electron., vol. 30, no. 2, pp. 1042-1049, 2015.
W. Lu, S. Lang, L. Zhou, H. Iu, and T. Fernando, “Improvement of Stability and Power Factor in PCM Controlled Boost PFC Converter With Hybrid Dynamic Compensation,” IEEE Trans. Circuits Syst. I Regul. Pap., vol. 62, no. 1, pp. 320-328, 2015.
S. Moon, G. Koo, and G. Moon, “A New Control Method of Interleaved Single-Stage Flyback AC-DC Converter for Outdoor LED Lighting Systems,” IEEE Trans. Power Electron., vol. 28, no. 8, pp. 4051-4062, 2013.
Y. Roh, Y. Moon, J. Park, and C. Yoo, “A Two- Phase Interleaved Power Factor Correction Boost Converter With a Variation-Tolerant Phase Shifting Technique,” IEEE Trans. Power Electron., vol. 29, no. 2, pp. 1032-1040, 2014.
Y. Jang and M. M. Jovanovic, “A Bridgeless PFC Boost Rectifier With Optimized Magnetic Utilization,” IEEE Trans. Power Electron., vol. 24, no. 1, pp. 85-93, 2009.
P. Kong, S. Wang, and F. C. Lee, “Common Mode EMI Noise Suppression for Bridgeless PFC Converters,” IEEE Trans. Power Electron., vol. 23, no. 1, pp. 291-297, 2008.
Y. Cho and J. Lai, “Digital Plug-In Repetitive Controller for Single-Phase Bridgeless PFC Converters,” IEEE Trans. Power Electron., vol. 28, no. 1, pp. 165-175, 2013.
Y. Kim, W. Sung, and B. Lee, “Comparative Performance Analysis of High Density and Efficiency PFC Topologies,” IEEE Trans. Power Electron., vol. 29, no. 6, pp. 2666-2679, 2014.
L. Huber, Y. Jang, and M. M. Jovanovic, “Performance Evaluation of Bridgeless PFC Boost Rectifiers,” IEEE Trans. Power Electron., vol. 23, no. 3, pp. 1381-1390, 2008.
K. I. Hwu, C. F. Chuang, and W. C. Tu, “High Voltage- Boosting Converters Based on Bootstrap Capacitors and Boost Inductors,” IEEE Trans. Ind. Electron., vol. 60, no. 6, pp. 2178-2193, 2013.
T. Qi, L. Xing, and J. Sun, “Dual-Boost Single-Phase PFC Input Current Control Based on Output Current Sensing,” IEEE Trans. Power Electron., vol. 24, no. 11, pp. 2523-2530, 2009.
G. W. Wester and R. D. Middlebrook, “Low-Frequency Characterization of Switched dc-dc Converters,” IEEE Trans. Aerosp. Electron. Syst., vol. AES-9, no. 3, pp. 376-385, 1973.
B. Choi, S. Hong, and H. Park, “Modeling and small- signal analysis of controlled on-time boost power- factor-correction circuit,” IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 136-142, 2001.
H. Y. Kanaan, G. Sauriol, and K. Al-Haddad, “Small- signal modelling and linear control of a high efficiency dual boost single-phase power factor correction circuit,” IET Power Electron., vol. 2, no. 6, pp. 665-674, 2009.
M. Rasheduzzaman, J. A. Mueller, and J. W. Kimball, “Reduced-Order Small-Signal Model of Microgrid Systems,” IEEE Trans. Sustain. Energy, vol. 6, no. 4, pp. 1292-1305, 2015.
M. Chen and J. Sun, “Reduced-order averaged modeling of active-clamp converters,” IEEE Trans. Power Electron., vol. 21, no. 2, pp. 487-494, 2006.
F. H. Dupont, C. Rech, R. Gules, and J. R. Pinheiro, “Reduced-Order Model and Control Approach for the Boost Converter With a Voltage Multiplier Cell,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3395-3404, 2013.
C. D. Townsend et al., “Optimization of Switching Losses and Capacitor Voltage Ripple Using Model Predictive Control of a Cascaded H-Bridge Multilevel StatCom,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3077-3087, 2013.
K. P. Louganski and J. Lai, “Current Phase Lead Compensation in Single-Phase PFC Boost Converters With a Reduced Switching Frequency to Line Frequency Ratio,” IEEE Trans. Power Electron., vol. 22, no. 1, pp. 113-119, 2007.
F. Segura, J. M. Andujar, and E. Duran, “Analog Current Control Techniques for Power Control in PEM Fuel- Cell Hybrid Systems: A Critical Review and a Practical Application,” IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1171-1184, 2011.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2017 Revista Facultad de Ingeniería Universidad de Antioquia
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0.
Los artículos disponibles en la Revista Facultad de Ingeniería, Universidad de Antioquia están bajo la licencia Creative Commons Attribution BY-NC-SA 4.0.
Eres libre de:
Compartir — copiar y redistribuir el material en cualquier medio o formato
Adaptar : remezclar, transformar y construir sobre el material.
Bajo los siguientes términos:
Reconocimiento : debe otorgar el crédito correspondiente , proporcionar un enlace a la licencia e indicar si se realizaron cambios . Puede hacerlo de cualquier manera razonable, pero no de ninguna manera que sugiera que el licenciante lo respalda a usted o su uso.
No comercial : no puede utilizar el material con fines comerciales .
Compartir igual : si remezcla, transforma o construye a partir del material, debe distribuir sus contribuciones bajo la misma licencia que el original.
El material publicado por la revista puede ser distribuido, copiado y exhibido por terceros si se dan los respectivos créditos a la revista, sin ningún costo. No se puede obtener ningún beneficio comercial y las obras derivadas tienen que estar bajo los mismos términos de licencia que el trabajo original.