Influence of temperature dependent physical properties of steel in finite element simulation of welding process
DOI:
https://doi.org/10.17533/udea.redin.16022Keywords:
Welding, finite elements, thermal-dependence, physical propertiesAbstract
A finite element model was developed to simulate the butt joint, with a 3.2 mm diameter electrode E 7018, of two plates of low carbon and low alloy steel. Also, the influence on the temperature distribution was studied considering temperature–dependent physical properties (thermal conductivity and specific heat).
Downloads
References
K. Easterling. Introduction to the physical metallurgy of welding. Ed. Butterworths & Co Publishers Ltda. London UK. 1985. pp. 17-32.
S. Kou. Welding Metallurgy. Wiley Interscience. New Jersey. 2a Ed. 2003. pp. 37-64.
American Welding Society. Welding Handbook, Volume 1: Welding Science and Technology. 9a Ed. USA. 2001. pp. 87-113.
E. Friedman. “Finite Element Analysis of Arc Welding”. Report WAPD-TM-1438. Department of Energy. USA. 1980. pp. 6-8. DOI: https://doi.org/10.2172/5691810
American Society of Metals. ASM Handbook: Welding, Brazing and Soldering, Vol. 6. USA. 1993. pp. 457-532.
J. Wang, Y. Ueda, H. Murakawa, M. G.Yuan, H. Q. Yang. “Improvement in numerical accuracy and stability of 3-D FEM analysis in welding”. Welding Journal. 1996. pp. 129-134.
Y. Ueda, J. Wang, H. Murakawa, M. G. Yuan. “Three dimensional numerical simulation of various thermomechanical processes by FEM”. JWRI. Vol. 22. 1993. pp. 289-294.
F. Ramos, A. Duffus, M. Rodríguez, E. M. Díaz, J. A. Pozo. “Modelo de elementos finitos para determinar el campo de temperatura en una costura de filete”. Revista de Ingeniería de la Universidad Autónoma de Yucatán. Vol. 11. 2007. pp. 33-42.
X. K. Zhu, Y. J. Chao. “Effects of temperature – dependent material properties on welding simulation”. Computers and Structures. Vol. 80. 2002. pp. 967-976. DOI: https://doi.org/10.1016/S0045-7949(02)00040-8
K. Masubuchi. Analysis of Welded Structures. Ed. Pergamon Press. Oxford. UK.1980. pp. 246-253.
M. Beghini, L. Bertini, D. Cantemir. “The effect of thermal properties on transient temperatures during welding of perforated plates”. XXXIV Convegno Nazionale. Associazione Italiana per L´ Analisi Delle Sollecitazioni. Politecnico di Milano. Italia. 2005. pp. 1-10.
I. W. Bang, Y. P. Son, K. H. Oh, Y. P. Kim, W. S. Kim. “Numerical Simulation of Sleeve Repair Welding of In- Service Gas Pipelines”. Welding Research Supplement. Welding Journal. 2002. pp. 273–282.
G. Elvira, C. Sanzi. “Proceso de reparación de plaqueado sobre una conexión de un recipiente de presión. Evaluación de la distribución térmica. Planteo de dos modelos de elementos finitos 2D y 3D. Comparación de resultados”. Memorias del Congreso CONAMET/SAM. Argentina. 2004. pp. 1-6.
W. Bullón, J. Acosta, R. Franco, Q. Valverde. “Simulación de un proceso de soldadura mediante un modelo termomecánico considerando el efecto de esfuerzos residuales utilizando el método de los elementos finitos”. Memorias 8º Congreso Iberoamericano de Ingeniería Mecánica. Cusco. Perú. 2007. pp. 1-13.
Y. García, J. Burgos, F. Gil, J. Rivalta. “Obtención de tensiones residuales a lo largo de un cordón de soldadura mediante métodos analíticos y experimentales”. Soldagem & Insp. Vol. 11. 2006. pp. 93-101.
American Society of Mechanical Engineers. ASME Boiler and Pressure Vessel Code. Section II Appendix D: Materials properties. New York. 2007. pp. 662- 670.
American Society of Metals. ASM Handbook: Properties and Selection: Iron, Steels and High Performance Alloys. Vol. 1. 1993. pp. 518-532.
J. Goldak, A. Chakravarti, M. Bibby. “A New Finite Element Model for Welding Heat Source”. Metallurgical Transactions B. Vol. 15 B. 1984. pp. 299-305. DOI: https://doi.org/10.1007/BF02667333
M. Cronje. “Finite Element Modelling of Shielded Metal Arc Welding”. Master of Science in Mechanical Engineering Thesis. Stellenbosch University. South Africa. 2005. pp. 17-84.
B. G. Livshits, V. S. Kraposhin, Y. L. Linetski. Propiedades físicas de metales y aleaciones. Ed. MIR. Moscú. 1982. pp. 14-323.
American Welding Society. AWS D1.1/D1.1M: Structural Welding Code – Steel. 2006. pp. 57-118.
H. B. Cary. Modern Welding Technology, 4th ed. Prentice Hall. Ohio. USA. 1998. pp. 107-204.
Downloads
Published
How to Cite
Issue
Section
License
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter