Influence of sodium chloride on the cloud point of polyethoxylate surfactants and estimation of Flory-Huggins model parameters

Authors

DOI:

https://doi.org/10.17533/udea.redin.n75a15

Keywords:

cloud point, NaCl, FloryHuggins model, nonionic surfactant

Abstract

In this study, the influence of NaCl on the cloud point of polyethoxylate surfactants from the family of lauryl alcohol polyethoxylates (C12EOn ) and nonylphenol polyethoxylates (NPEOn ) was investigated. Liquid-liquid equilibrium curves of the aforementioned aqueous surfactants system with the presence of NaCl were plotted and thermodynamic parameters based on the Flory-Huggins model were obtained. The visual method was used to determine the cloud point. Solutions containing surfactant concentrations between 0.5 and 20% (by weight) and NaCl between 4.9 and 12.1% (by weight) were prepared. Salt had a salting-out effect, decreasing surfactant solubility in water. Furthermore, the cloud point decreased with an increase of NaCl concentration. The Flory-Huggins model satisfactorily described the experimental data for all surfactant + NaCl aqueous mixtures studied.

|Abstract
= 357 veces | PDF
= 234 veces|

Downloads

Download data is not yet available.

Author Biographies

Alessandro Alisson de Lemos-Araújo, Federal University of Rio Grande do Norte

Department of Chemical Engineering.

Eduardo Lins de Barros Neto, Federal University of Rio Grande do Norte

Department of Chemical Engineering.

Osvaldo Chiavone-Filho, Federal University of Rio Grande do Norte

Department of Chemical Engineering.

Edson Luiz Foletto, Federal University of Santa Maria

Department of Chemical Engineering.

References

I. Fischer, M. Franzreb. “Direct Determination of the Composition of Aqueous Micellar Two-phase Systems (AMTPS) Using Potentiometric Titration – A Rapid Tool for Detergent-Based Bioseparation”. Coll. Surf. A: Physicochem. Eng. Aspects. Vol. 377. 2011. pp. 97- 102.

K. Hung, B. Chen, L. Yu. “Cloud-point Extraction of Selected Polycyclic Aromatic Hydrocarbons by Nonionic Surfactants”. Sep. Purif. Techn. Vol. 57. 2007. pp. 1-10.

T. Gu, P. Galera. “Clouding of Triton X-114: The Effect of Added Electrolytes on the Cloud Point of Triton X-114 in the Presence of Ionic Surfactants”. Coll. Surf. A: Physicochem. Eng. Aspects. Vol. 104. 1995. pp. 307-312.

H. Schott. “Effect of Inorganic Additives on Solutions of Nonionic Surfactants – XIV. Effect of Chaotropic Anions on the Cloud Point of Octoxynol 9 (Triton X-100)”. J. Coll. Interf. Sci. Vol. 189. 1997. pp. 117- 122.

M. Cunha, F. Tjerneld, J. Cabral, M. Aires. “Effect of Electrolytes and Surfactants on the Thermoseparation of an Ethylene Oxide–propylene Oxide Random Copolymer in Aqueous Solution”. J. Chromatogr. B. Vol. 711. 1998. pp. 53-60.

C. Santos, A. Lopes, A. Converti, A. Júnior, C. Rangel. “Behavior of Triton X-114 Cloud Point in the Presence of Inorganic Electrolytes”. Fluid Phase Equil. Vol. 360. 2013. pp. 435-438.

K. Sharma, S. Patil, A. Rakshit. “Study of the Cloud Point of C12En Nonionic Surfactants: Effect of Additives”. Coll. Surf. A: Physicochem. Eng. Aspects. Vol. 219. 2003. pp. 67-74.

J. Li, D. Bai, B. Chen. “Effects of Additives on the Cloud Points of Selected Nonionic Linear Ethoxylated Alcohol Surfactants”. Coll. Surf. A: Physicochem. Eng. Aspects. Vol. 346. 2009. pp. 237-243.

P. Nilsson, W. Pacynko, G. Tiddy. “Clouding in Zwitterionic Surfactant/Water Systems – The Influence of Additives on the Upper Consolute Loop of the Decyldimethylammonioethane Sulfatey/Water System”. Current Opinion Coll. Interf. Sci. Vol. 9. 2004. pp. 117-123.

H. Akbaş, M. Boz, Ç. Batığöç. “Study on Cloud Points of Triton X-100-cationic Gemini Surfactants Mixtures: A Spectroscopic Approach”. Spectrochim. Acta Part A. Vol. 75. 2010. pp. 671-677.

T. Inoue, T. Misono. “Cloud Point Phenomena for POE-type Nonionic Surfactant in a Model Room Temperature Ionic Liquid”. J. Coll. Interf. Sci. Vol. 326. 2008. pp. 483-489.

T. Inoue, T Misono. “Cloud Point Phenomena for POE-type Nonionic Surfactants in Imidazolium-based Ionic Liquids: Effect of Anion Species of Ionic Liquids on the Cloud Point”. J. Coll. Interf. Sci. Vol. 337. 2009. pp. 247-253.

T. Inoue, Y. Iwasaki. “Cloud Point Phenomena of Polyoxyethylene-type Surfactants in Ionic Liquid Mixtures of EmimBF4 and HmimBF4 ”. J. Coll. Interf. Sci. Vol. 348. 2010. pp. 522-528.

A. Mohamed, R. Amina, V. Didier. “Cloud-point Extraction of Bismuth (III) with Nonionic Surfactants in Aqueous Solutions”. Coll. Surf. A: Physicochem. Eng. Aspects. Vol. 375. 2011. pp. 169-177.

H. Radfarnia, V. Taghikhani, C. Ghotbi, M. Khoshkbarchi. “A Free-volume Modification of GEMQC to Correlate VLE and LLE in Polymer Solutions”. J. Chem. Thermodyn. Vol. 36. 2004. pp. 409-417.

E. Clark, J. Lipson. “LCST and UCST Behavior in Polymer Solutions and Blends”. Polymer. Vol. 53. 2012. pp. 536-545.

T. Inoue, H. Ohmura, D. Murata. “Cloud Point Temperature of Polyoxyethylene-type Nonionic”. Coll. Interf. Sci. Vol. 258. 2003. pp. 374-382.

K. Weckström, A. Papageorgiou. “Lower Consolute Boundaries of the Nonionic Surfactant C8E5 in Aqueous Alkali Halide Solutions: An Approach to Reproduce the Effects of Alkali Halides on the Cloudpoint Temperature”. J. Coll. Interf. Sci. Vol. 310. 2007. pp. 151-162.

N. Sato, M. Mori, H. ltabashi. “Cloud Point Extraction of Cu (II) Using a Mixture of Triton X-100 and Dithizone with a Salting-out Effect and its Application to Visual Determination”. Talanta. Vol. 117. 2013. pp. 376-381.

Downloads

Published

2015-05-19

How to Cite

de Lemos-Araújo, A. A., de Barros Neto, E. L., Chiavone-Filho, O., & Foletto, E. L. (2015). Influence of sodium chloride on the cloud point of polyethoxylate surfactants and estimation of Flory-Huggins model parameters. Revista Facultad De Ingeniería Universidad De Antioquia, (75), 155–162. https://doi.org/10.17533/udea.redin.n75a15