Análisis del cortocircuito entre espiras de un motor de inducción tipo jaula de ardilla mediante la aplicación del método de elementos finitos (mef)
DOI:
https://doi.org/10.17533/udea.redin.14915Keywords:
impedancia de secuencia inversa, par electromagnético, cortocircuito entre espiras, método de elementos finitos, motor de inducciónAbstract
En este artículo se realiza el análisis del par y la impedancia de secuencia inversa con la evolución de una falla de cortocircuito entre espiras de un devanado estatórico de un motor de inducción tipo jaula de ardilla de 3HP, 220V.
Downloads
References
A. Lebaroud, G. Clerc. “Classification of Induction Machine Faults by Optimal Time-Frequency Representations”. IEEE Transactions on Industrial Electronics. Vol. 55. 2008. pp. DOI: https://doi.org/10.1109/TIE.2008.2004666
C. H. Rojas, M.G. Melero. M. F. Cabanas. J. M. Cano. G. A. Orcajo, F. Pedrayes. “Finite Element Model for the Study of Inter-Turn Short Circuits in Induction Motors”. Diagnostics for Electric Machines. Power
Electronics and Drives. SDEMPED 2007. IEEE International Symposium 6-8 Sept. 2007 pp.415-419.
M. F. Cabañas, M. García Melero, G. A. Orcajo, J. M. Cano, J. S. Sariego. Técnicas para el mantenimiento y diagnóstico de máquinas eléctricas rotativas. Marcombo editores S.A. Barcelona 1998. pp.
J. C. Urresty. Diagnóstico de rotura de barras en un motor de inducción de Jaula de ardilla mediante la aplicación del método de Elementos finitos. Trabajo de grado. Universidad del Valle. Facultad de Ingeniería. Escuela de Ingeniería Eléctrica y Electrónica. Cali. 2006. pp.
D. Díaz, R. Díaz. Diagnóstico de fallas estatóricas en un motor de inducción de Jaula de ardilla mediante la aplicación del método de Elementos finitos. Trabajo de grado. Universidad del Valle. Facultad de Ingeniería. Escuela de Ingeniería Eléctrica y Electrónica. Cali. 2007. pp.
F. Villada, D. Cadavid, N. Muñoz. “Estudio del comportamiento de motores de inducción ante fallas estatóricas”. Rev. Fac. Ing. Univ. Antioquia. N.o? .2007. pp.
D. F. Percy, J. L. Oslinger. Pruebas de impulso y de alto voltaje de CD para la evaluación de devanados de maquinas rotativas. Cátedra de conversión de energía. Facultad de Ingeniería. Universidad del Valle. Cali. 1998. pp.
D. F. Parra, G. O. Ocampo. Estudio del comportamiento de motores de inducción ante fallas estatóricas. Tesis de pregrado. Universidad de Antioquia. Medellín. 2004. pp.
X. Boqiang, L. Heming, S. Liling. “Negative Sequence Admittance Average Based Detection of Stator Winding Inter-turn Short Circuit Fault in Induction Motors”. Sixth International Conference on Electrical Machines and Systems. ICEMS 2003. Vol. 2. 2003. pp.867-870.
FLUX2D®. Software de aplicación basado en el método de los elementos finitos. marca registrada del Grupo CEDRAT. http://www.cedrat.com/en/softwaresolutions/flux.html. Consultada el ¿?
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Revista Facultad de Ingeniería
![Creative Commons License](http://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.