Use of the information gathered during I/M programs to estimate emissions from gasoline vehicles
DOI:
https://doi.org/10.17533/udea.redin.14920Keywords:
Emission factors, exhaust gas emissions, I/M programsAbstract
Currently, most of the vehicular emissions inventories developed for large cities are based on the emissions factors developed by the US EPA. Trying to use the US EPA MOBILE tool, the local environmental authorities concentrate their efforts in modifying those emissions factors to take care of the particular characteristics of each city. However, there is still a need for a methodology based on experimental tests to improve the accuracy of the emissions inventories developed for large cities. To address this need, the present work proposes a methodology to improve the accuracy of the vehicular emissions inventory using the information gathered during the inspection and maintenance (I/M) programs where the emissions of 100% of the vehicular fleet is evaluated using the ASM 5015, ASM 2525 or similar type of tests. Experimental work on road and on a chassis dynamometer was developed to explore the feasibility of implementing such methodology for the case of the constant speed mode of operation in a particular type of car. Preliminary results show that the proposed methodology has the potential to be implemented for the case of constant speed mode of operation.
Downloads
References
B. Onursal, S. Gautam. “Contaminación Atmosférica por Vehículos Automotores”. Experiencias recogidas en siete centros urbanos de América Latina. Banco Mundial. USA. 1997.
Secretaría de Medio Ambiente y Recursos Naturales. “Segundo Informe de la situación del medio ambiente en México”. Compendio de Estadísticas Ambientales 2005. México 2005.
Environmental Protection Agency and Sierra Research Inc. “MOBILE6 On-Road Motor Vehicle Emissions Model”. USA 2001.
H. Rakha, K. Ahn, A.Trani “Comparison of MOBILE5a, MOBILE6, VT-MICRO, and CMEM Models for Estimating Hot-stabilized Light Duty Gasoline Vehicle Emissions”. Canadian Journal of Civil Engineering. 2003. DOI: https://doi.org/10.1139/l03-017
Degobert, P. Automobiles and Pollution. Society of automotive engineers. France. 1999.
Norma Oficial Mexicana NMX-011-1993-SCF Método de Prueba para la Evaluación de Emisiones de Gases del Escape de los Vehículos Automotores Nuevos en Planta que usan Gasolina como Combustible. México. 1999.
J. I. Huertas, A.Valdez. “Desarrollo de Ciclos Típicos de Conducción para el Municipio de Naucalpan”. V Simposio de Contaminación Atmosférica. México. Agosto 2005.
E. Booth, T. Muneer, J. Kubie, H. Kirby. “A Review of Vehicular Emission Model and Driving Cycles”. Proceedings of the Institution of Mechanical Engineers. Wilson Applied Science & Technology. USA. 2002.
M. Andre. “Driving Cycle Development Characterization of the Methods”. SAE International spring fuels and lubricants meeting. USA. 1996.
http://www.nissanplatina.com.mx. 2007.
http://www.pemex.com/ México. 2007.
http://www.sma.df.gob.mx México. 2007.
H. Frey, A. Unal, N. Rouphail, J. Colyar. “On-road Measurement of Vehicle Tailpipe Emissions Using a Portable Instrument”. Journal of the Air & Waste Management Association. 2003. DOI: https://doi.org/10.1080/10473289.2003.10466245
J. I. Huertas, E. García, J. Díaz “Development of a Fifth Wheel to Evaluate the Performance of Vehicles by on Road Tests”. CARS & FOF 2004. 2004.
J. B. Heywood. Internal Combustion Engine Fundamentals. 1988. pp 915.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Revista Facultad de Ingeniería
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.