Study microstructure and composition of oxidation in steam at 700 and 750°C of austenitic steels AISI 304, 316 and 317
DOI:
https://doi.org/10.17533/udea.redin.16314Keywords:
high temperature oxidation, austenitic stainless steels, thermogravimetry, thermodynamic simulation of oxidation, water steam oxidationAbstract
We have investigated the oxidation of austenitic stainless steels AISI SAE: 304, 316 and 317, at temperatures of 700 to 750°C in an atmosphere approaching 100% of steam, and in a time range of 10 to 1000h of exposure. The purpose is to check the quality of austenitic steels and studying the morphology, composition and structure of the phases of the layers formed on the oxide scale samples by scanning electron microscopy (SEM), X-ray analysis energy dispersive (EDAX) and X-ray Diffraction (XRD), respectively. Just as well, has been performed at different times, a systematic study of Thermogravimetry of the samples oxidized, which was observed that the AISI 304 steel had the lowest mass gain and the AISI 316 steel had the higher mass gain respect to the three steels of the work. Additionally we carried out a theoretical study of thermodynamic simulation of steam oxidation of three steels, under the same experimental conditions and by the Thermo-calc program. In the oxidized steels have been checked the presence of oxide phase structures such as Fe2O3, the protective mixed spinels Fe3O4 and Cr2NiO4, and mixed oxides of type (CrxFey)2O3, (Fe,Cr,Mn)3O4 and Ni6MnO8. Finally, it was discusses a possible mechanism of formation of oxide layers of the samples tested.
Downloads
References
G. Meetham, M. Van de Voorde. Materials for high temperature engineering applications. Ed. Springer. Berlin, Germany. 2000. pp. 1-18. DOI: https://doi.org/10.1007/978-3-642-56938-8_1
J. Zurek, E. Wessel, L. Niewolak, F. Schmitz, T. Kern, L. Singheiser. “Anomalous temperature dependence of oxidation kinetics during steam oxidation of ferritic steels in the temperature range 550–650 ºC”. Corrosion Science. Vol. 46. 2004. pp. 2301-2317. DOI: https://doi.org/10.1016/j.corsci.2004.01.010
S. Tsipas, J. Brossard, P. Hierro, J. Trilleros, L. Sánchez, F. Bolívar, F. Pérez. “Al–Mn CVD-FBR protective coatings for hot corrosion application”. Surface & Coatings Technology. Vol. 201. 2007. pp. 4489-4495. DOI: https://doi.org/10.1016/j.surfcoat.2006.06.023
J. Ehlers, D. Young, E. Smaardijk, A. Tyagi, H. Penkalla, L. Singheiser, W. Quadakkers. “Enhanced oxidation of the 9%Cr steel P91 in water vapor containing environments”. Corrosion Science. Vol. 48. 2006. pp. 3428-3454. DOI: https://doi.org/10.1016/j.corsci.2006.02.002
Lai G. High temperature corrosion of engineering alloys. ASM International. Materials Park, OH -USA. 1990. pp. 222-265.
N. Othman, N. Othman, J. Zhang, D. Young. “Effects of water vapor on isothermal oxidation of chromic-forming alloys in Ar/O2 and Ar/H2 atmospheres”. Corrosion Science. Vol. 51. 2009. pp. 3039-3049. DOI: https://doi.org/10.1016/j.corsci.2009.08.032
X. Peng, J. Yan, Y. Zhou, F. Wang. “Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air”. Acta Material. Vol. 53. 2005. pp. 5079-5088. DOI: https://doi.org/10.1016/j.actamat.2005.07.019
H. Asteman, J. Svensson, L. “Johansson. Oxidation of 310 steel in H2O/O2 mixtures at 600 ºC: the effect of water-vapor-enhanced chromium evaporation”. Corrosion Science. Vol. 44. 2002. pp.2635-2649. DOI: https://doi.org/10.1016/S0010-938X(02)00056-2
F. Pérez, S. Castañeda. Study of oxyhydroxides formation on P91 ferritic steel and slurry coated by Al in contact with Ar+80%H2O at 650 °C by TG-Mass spectrometry. Surface & Coatings Technology. Vol. 201. 2007. 6239-6246. DOI: https://doi.org/10.1016/j.surfcoat.2006.11.029
S. Castañeda, F. Bolívar, F. Pérez. “Study of oxyhydroxides formation on P91 ferritic steel and CVD-FBR coated by Al in contact with Ar+40%H2O at 650 °C by TG-Mass spectrometry”. Oxidation of metal. Vol. 74. pp. 61-78. DOI: https://doi.org/10.1007/s11085-010-9200-z
S. Saunders, M. Monteiro, F. Rizzo. “The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapor: A review”. Progress in Materials Science. Vol. 53. 2008. 775-837. DOI: https://doi.org/10.1016/j.pmatsci.2007.11.001
V. Lepingle, G. Louis, D. Allué, B. Lefebvre, B. Vandenberghe. “Steam oxidation resistance of new 12%Cr steels: Comparison with some other ferritic steels”. Corrosion Science. Vol. 50. 2008. pp. 1011- 1019. DOI: https://doi.org/10.1016/j.corsci.2007.11.033
G. Bamba, Y. Wouters, A. Galerie, G. Borchardt, S. Shimada, O. Heintz, S. Chevalier. “Inverse growth transport in thermal chromic scales on Fe–15Cr steels in oxygen and in water vapor and its effect on scale adhesion”. Scripta Materialia. Vol. 57. 2007. 671-674. DOI: https://doi.org/10.1016/j.scriptamat.2007.06.050
M. Halvarsson, J. Tang, H. Asteman, J. Svensson, L. Johansson. “Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapor at 600 ºC”. Corrosion Science. Vol. 48. 2006. pp. 2014-2035. DOI: https://doi.org/10.1016/j.corsci.2005.08.012
Z. Yang, G. Xia, P. Singh, J. Stevenson. “Effects of water vapor on oxidation behavior of ferritic stainless steels under solid oxide fuel cell interconnect exposure conditions”. Solid State Ionics. Vol. 176. 2005. pp. 1495-1503. DOI: https://doi.org/10.1016/j.ssi.2005.03.019
X. Gao, X. Wu, Z. Zhang, H. Guan, E. Han. “Characterization of oxide films grown on 316L stainless steel exposed to H2 O2 -containing supercritical water”. Journal of Supercritical Fluids. Vol. 42. 2007. pp. 157-163. DOI: https://doi.org/10.1016/j.supflu.2006.12.020
A. Agüero, R. Muelas, M. Gutiérrez, R. Van Vulpen, S. Osgerby, J. Banks. “Cyclic oxidation and mechanical behavior of slurry aluminide coatings for steam turbine components”. Surface and Coating Technology. Vol. 201. 2007. pp. 6253-6260. DOI: https://doi.org/10.1016/j.surfcoat.2006.11.033
B. Pujilaksono, T. Jonsson, M. Halvarsson, J. Svensson, L. Johansson. “Oxidation of iron at 400 - 600 ºC in dry and wet O2”. Corrosion Science. Vol. 52. 2010. pp. 1560-1569. DOI: https://doi.org/10.1016/j.corsci.2010.01.002
S. Cheng, S. Kuan, W. Tsai. “Effect of water vapor on annealing scale formation on 316 SS”. Corrosion Science. Vol. 48. 2006. pp. 634-649. DOI: https://doi.org/10.1016/j.corsci.2005.02.014
A. Huntz, A. Reckmann, C. Haut, C. Sévérac, M. Herbst, F. Resende, A. Sabioni. “Oxidation of AISI 304 and AISI 439 stainless steels”. Materials Science and Engineering A. Vol. 447. 2007. 266-276. DOI: https://doi.org/10.1016/j.msea.2006.10.022
T. Maitra, S. Gupta. “Intermetallic compound formation in Fe-Al-Si ternary system: Part II”. Materials Characterization. Vol. 49. 2002. pp. 293- 311. DOI: https://doi.org/10.1016/S1044-5803(03)00005-6
P. Surman, J. Castle. “Gas phase transport in the oxidation of Fe and steel”. Corrosion Science. Vol. 9. 1999. pp. 771-777. DOI: https://doi.org/10.1016/S0010-938X(69)80083-1
L. Thushinsky, I. Kovensky, A. Plokhov. Coated Metal. Ed. Springer. Berlin, Germany. 2002. p. 438. DOI: https://doi.org/10.1007/978-3-662-06276-0
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Revista Facultad de Ingeniería
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter