Adhesion characteristics between keratin fibers and unsaturated polyester
DOI:
https://doi.org/10.17533/udea.redin.17925Keywords:
Adhesion, keratin fibers, composite materials, adhesion testingAbstract
This work presents the methods and results employed to find the adhesion characteristics between keratin fibers and unsaturated polyester as matrix material. The fibers were conditioned prior to testing using four different methods in order to establish the effect of these treatments on the adhesion to the matrix by means of i) monofilament pull-out testing, as direct method; and ii) Lamina tensile tests as indirect method to analyze the adhesion in the fracture zone with the help of electron microscopy (SEM).
Downloads
References
K. Okubo, T. Fujii, Y. Yamamoto, “Development of bamboo-based polymer composites and their mechanical properties” Composites Part A. Vol. 35. 2004. pp. 377-383. DOI: https://doi.org/10.1016/j.compositesa.2003.09.017
D. Rouison, M. Sain, M. Couturier. “Resin transfer molding of natural fiber reinforced composites: cure simulation” Composites Science and Technology. Vol. 64. 2004. pp. 629-644. DOI: https://doi.org/10.1016/j.compscitech.2003.06.001
W. Liu, M. Misra, P. Askeland, L. T. Drzal, A. K. Mohanty. “Green composites from soy based plastic and pineapple leaf fiber: fabrication and properties evaluation” Polymer. Vol. 46. 2005. pp. 2710-2721. DOI: https://doi.org/10.1016/j.polymer.2005.01.027
S. M. Martelli, G. Moore, S. Silva, C. Gandolfo, J. Borges. “Influence of plasticizers on the water sorption isotherms and water vapor permeability of chicken feather keratin films”. LWT - Food Science and Technology. Vol. 39. 2006. pp. 292-301. DOI: https://doi.org/10.1016/j.lwt.2004.12.014
A. L. Martínez, C. Velasco, M. de Icazaa, V. M. Castaño. “Mechanical properties evaluation of new composites with protein biofibers reinforcing poly(methyl methacrylate)”. Polymer. Vol. 46. 2005. pp. 8233-8238 DOI: https://doi.org/10.1016/j.polymer.2005.06.093
J. R. Barone, W. F. Schmidt. “Polyethylene reinforced with keratin fibers obtained from chicken feathers”. Composites Science and Technology. Vol. 65. 2005. pp.173-181. DOI: https://doi.org/10.1016/j.compscitech.2004.06.011
H. A. Barnes, G. P. Roberts. “The non-linear viscoelastic behaviour of human hair at moderate extensions”. Int. Journal of Cosmetic Science. Vol. 22. 2000. pp. 259-264. DOI: https://doi.org/10.1046/j.1467-2494.2000.00008.x
J. A. Swift. “The mechanics of fracture of human hair at moderate extensions”. Int. Journal of Cosmetic Science. Vol. 21. 1999. pp. 227-239. DOI: https://doi.org/10.1046/j.1467-2494.1999.186942.x
G. Wei, B. Bushan, P. M. Jorgeson. “Nanomechanical characterization of human hair using nanoindentation and SEM”. Ultramicroscopy. Vol. 105. 2005. pp. 248-266. DOI: https://doi.org/10.1016/j.ultramic.2005.06.033
C. LaTorre, B. Bushan. “Nanotribological characterization of human hair using atomic force microscopy”. Ultramicroscopy. Vol. 105. 2005. pp. 155-175. DOI: https://doi.org/10.1016/j.ultramic.2005.06.032
G. Wei, B. Bushan, P. M. Jorgeson. “Nanotribological and nanomechanical characterization of human hair using a nanoscratch technique”. Ultramicroscopy. Vol. 106. 2006. pp. 742. DOI: https://doi.org/10.1016/j.ultramic.2005.12.009
A. Ossa, F. Cano, J. Arango, C. Montoya. “Estudio comparativo de las propiedades mecánicas de las fibras de vidrio y queratina”. Scientia et Técnica. N° 36. 2007. pp. 407-412.
L. T. Drzal, P. J. Herrera-Franco, H. Ho. “Fibber-matrix interface tests”. Comprehensive Composite Materials. Elsevier. 2000. pp. 1- 41. DOI: https://doi.org/10.1016/B0-08-042993-9/00036-X
S. Zhandarov, E. Mäder. “Characterization of fiber/matrix interface strength”. Composites Science and Technology. Vol. 65. 2005. pp. 149-160. DOI: https://doi.org/10.1016/j.compscitech.2004.07.003
P. J. Herrera, A. Valadez. “A study of the mechanical properties of short natural-fiber reinforced composite”. Composites Part B:Engineering. Vol. 36. 2005. pp. 597-608. DOI: https://doi.org/10.1016/j.compositesb.2005.04.001
R. Askeland. “Ciencia e ingeniería de los materiales”. International Thompson Editores S.A. México. 4ª ed. 2004. pp. 240-249
Norma ASTM C 1557-03. Standard Test Method for Tensile Strength and Young’s Modulus of Fibers.
Norma ASTM D638-03. Standard Test Method for Tensile Properties of Plastics.
Downloads
Published
How to Cite
Issue
Section
License
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter