Ingeniería de calidad: optimización del proceso de mecanizado en una máquina de control numérico mediante el diseño de parámetros
DOI:
https://doi.org/10.17533/udea.redin.326318Keywords:
Métodos Taguchi, diseño de parámetros, ingeniería de calidad.Abstract
En este artículo se exponen los principales aportes del Dr. Taguchi en el área de la ingeniería de la calidad así como los principios y metodología del diseño de parámetros. El diseño de parámetros, donde se utiliza la relación señal-ruido dinámica, se ha aplicado para mejorar la robustez del mecanizado de acero en una máquina de control numérico. Los resultados obtenidos demuestran que esta herramienta resulta eficaz para mejorar la calidad a bajo costo.Downloads
References
American Supplier lnstitute ( 1984): Proceedings ofthe First Supplier Symposium on Taguchi Methods. April. ASI.
American Supplier lnstitute ( 1999): Proceedings of the 17th Supplier Symposium on Taguchi Method. October. ASI.
Box , G.E.P., S. Bisgaard, And C.A. Fung (1988): "An Explanation and Critique of Taguchi 's Contributions to Quality Engineering" Quality and Realiability Engineering International. Vol. 4. No. 2. 21-123. DOI: https://doi.org/10.1002/qre.4680040207
Bylinsky, G. ( 1998): "How to bring better products faster" Fortune, Industrial Management & Tecbnology. November 23. 238 8-T.
Guerrero, J .L. ( 1999): "Multivariate exponential families and the Taguchi loss function" Inform.-Sci., Vol. 115. No. 1-4,187-199. DOI: https://doi.org/10.1016/S0020-0255(98)10074-9
lrianto, D. ( 1998): "Loss of society derived from utility and cost function" Omega. Vol. 26. No. 5, 671-677. DOI: https://doi.org/10.1016/S0305-0483(98)00012-7
Jugulum, R., And M. Sefik (1998): "Building a robust manufacturing strategy" Computers and Industrial Engineering. Vol. 35, o. 1-2, 229-232. DOI: https://doi.org/10.1016/S0360-8352(98)00070-9
Madison, J. ( 1996): Cnc Machining ,Handbook: Basic Theory, Production Data, and Machining Procedures. Press Lnc.
Nair, V.N. (1992): "Taguchi's parameter design: a panel discussion" Teclmometrics. Vol. 34. No. 2, 127-161. DOI: https://doi.org/10.1080/00401706.1992.10484904
Peace, G.S. ( 1993): "Orthogonal Arrays, Degrees of Freedom, Linear Graphs" in Taguchi Methods a Hands-On Approach, Addison-Wesley Publishing Company Lnc., 114-166.
Peace,G.S.(1993): "Conceptual Background" in Taguchi Methods a Hands-O11 Approach, Addison-Wesley Publistting Company lnc., 1-12.
Raktoe, B.L., A. Hedayat, A., And W.T. Federer ( 1981 ): Factorial Designs, John Wiley, New York.
Taguchi, G., S. Chowdhury, and S. Taguchi (1999): Robust Engineering, McGraw-Hill.
Wu Y. And A. Wu (1997-a): "Tipos básicos de relaciones SIR dinámicas para variables continuas" in Dise,io robusto utilizando los métodos Taguchi, Ediciones Diaz de Santos, Madrid, 43-69.
Wu Y. And A. Wu (1997-b): "Desarrollo de tecnología robusta" in Diseño Robusto utilizando los Métodos Taguchi. Ediciones Díaz de Santos. Madrid. 259-271.
Downloads
Published
How to Cite
Issue
Section
License
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter