Design of passive heat sinks to power semiconductor with the cesaro curve
DOI:
https://doi.org/10.17533/udea.redin.20200162Keywords:
thermal analysis, heat sinks, Cesaro curve, ANSYS, power semiconductorsAbstract
In the design of electronic circuits, stands out the power stage, which is responsible of increasing the signal characteristics, as current and voltage, for an appropriate performance of the device to fabricate. However, this stage is composed of elements like transistors, which may have a low performance, due to the undesired temperature increase, as a result of reaching the desired power. To mitigate the loss of power and with it, the temperature rise, the management of heat sink is proposed, in order to keep the work of the power stage at a stable level and avoid thermal fractures within the circuit. This manuscript presents the obtained results of the thermal analysis in finite elements of the heat sink with fins in the form of a Cesaro curve, for power semiconductors, which evidence the increase in the heat flow, with respect to the commercial ones and so, facilitate the heat evacuation for conditioning the voltage and/or current.
Downloads
References
S. Sakurai and et al, “Design and Development of Lower Divertor for JT-60SA,” in International Conferences on Fusion Energy, Naka, Korea, 2010, pp. 1–7.
H. Chi, J. Jang, H. Yeh, and M. Wu, “The heat transfer characteristics of liquid cooling heatsink containing microchannels,” International Journal of Heat and Mass Transfer, vol. 54, no. 1, January 15 2011. [Online]. Available: https://doi.org/10.1016/j.ijheatmasstransfer.2010.09.066
V. Pickert, H. Cheng, L. Pritchard, and D. J. Atkinson, “An experimental and computational study of water cooled heatsinks for HEV’s,” in 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010), Brighton, United Kingdom, 2010.
C. C. Davidson, R. M. Preedy, J. Cao, C. Zhou, and J. Fu, “Ultrahigh power thyristor valves for HVDC in developing countries,” in 9th IET International Conference on AC and DC Power Transmission (ACDC 2010), London, United Kingdom, 2010.
X. Zhou and et al, “High-frequency EMC design verification through full-wave simulations and measurements in Reverberation Chamber,” in 2013 IEEE International Symposium on Electromagnetic Compatibility, Denver, Colorado, 2013, pp. 299–305.
A. P. Van de Ven, “Lighting device with flexibly coupled heatsinks,”Patent WO2 012 109 060A3, Nov. 1, 2012.
M. D. McClure and A. J. McClure, “Slotted heatsinks and systems and methods related thereto,” U.S. Patent US20 140 049 964A1, Feb. 20, 2014.
K. T. Park, H. J. Kim, J. Yoo, M. G. Lee, and D. Kim, “Experimentalstudy on effect of inclination angle on natural convection fromcylindrical heatsinks with plate fins,” Transactions of the KoreanSociety of Mechanical Engineers B, vol. 39, no. 4, April 2015. [Online].Available: https://doi.org/10.3795/KSME-B.2015.39.4.343
S. Tian, T. M. Cipolla, and P. W. Coteus, “Coined-sheet-metaleatsinks for closely packaged heat-producing devices such as dualin-line memory modules (DIMMs),” U.S. Patent US7 715 197B2, May11, 2010.
Y. Sun, F. Wu, and K. Chen, “Semiconductor device packages withintegrated heatsinks,” U.S. Patent US20 110 049 704A1, Mar. 3, 2011.
E. Farsad, S. P. Abbasi, and M. S. Zabihi, “Fluid flow and heat transfer in a novel microchannel heat sink partially filled with metal foam medium,” Journal of Thermal Science and Engineering Applications, vol. 6, no. 2, June 2014. [Online]. Available: https://doi.org/10.1115/1.4025823
C. L. Belady, E. C. Peterson, S. L. Harris, S. A. Belson, and G. W. Williams, “Redundant power beneath circuit board,” U.S. Patent US7 791 889B2, Sep. 7, 2010.
X. He and T. H. Hubing, “Mitigation of unintentional radiated emissions from tall VLSI heatsinks using ground posts,” IEEE Transactions on Electromagnetic Compatibility, vol. 55, no. 6, May 13 2013. [Online]. Available: https://doi.org/10.1109/TEMC.2013.2259629
J. J. Casanova, J. A. Taylor, and J. Lin, “Design of a 3-D Fractal Heatsink Antenna,” IEEE Antennas and Wireless Propagation Letters, vol. 9, November 9 2010. [Online]. Available: https://doi.org/10.1109/LAWP.2010.2091104
K. Horiuchi, A. Nishihara, and K. Sugimura, “Multi-objective optimization of water-cooled pinfin eatsinks,” International Journal of Heat and Mass Transfer, vol. 81, February 2015. [Online]. Available: https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.057
C. Serafy, A. Srivastava, A. Bar-Cohen, and D. Yeung, “Design space exploration of 3D CPUs and micro-fluidic heatsinks with thermoelectrical-physical co-optimization,” in 13th International Conference on Nanochannels, Microchannels, and Minichannels, San Francisco, United States, 2015, p. 10.
G. N. Shilo, E. V. Ogrenich, and N. P. Gaponenko, “Design of finned heatsinks having minimum mass,” in International Conference Modern Problems of Radio Engineering, Telecommunications, and Computer Science,, Lviv-Slavske, Ukraine, 2010, pp. 23–27.
M. D. Neumann, “Heatsinks and a spring in a baffle slot between adjacent components,” U.S. Patent US7 821 785B1, Oct. 26, 2010.
Z. Ying and Z. Kai, “Numerical analysis and experimental research on finned heatsinks with heat pipes,” Cryogenics & Superconductivity, vol. 2, 2013.
A. S. Chernyshov, H. Yuan, B. Valcu, A. Ajan, and R. B. Acharya, “Recording media with multiple bi-layers of heatsink layer and amorphous layer for energy assisted magnetic recording system and methods for fabricating the same,” U.S. Patent US8 605 555B1, Dec. 10, 2013.
L. E. Llano, L. C. Ruiz, D. M. Domínguez, and M. C. Melo, “Design of longitudinal Finned tubes adjusted with the Cesàro curve,” Revista Facultad de Ingeniería, vol. 27, no. 48, May 2018. [Online]. Available: http://dx.doi.org/10.19053/01211129.v27.n48.2018.8104
M. Hu, D. Baleanu, and X. Yang, “One-phase problems for discontinuous heat transfer in fractal media,” Mathematical Problems in Engineering, vol. 2013, no. 3, January 2013. [Online]. Available: http://dx.doi.org/10.1155/2013/358473
H. Wang, “Fast image fractal compression with graph-based image segmentation algorithm,”International Journal of Graphics, vol. 1, no. 1, pp. 19–28, Nov. 2010.
J. Pourahmadazar, C. Ghobadi, and J. Nourinia, “Novel modified pythagorean tree fractal monopole antennas for UWB applications,”IEEE Antennas and Wireless Propagation Letters, vol. 10, May 2011. [Online]. Available: http://dx.doi.org/10.1109/LAWP.2011.2154354
S. Lin and et al, “A printed log-periodic tree-dipole antenna (PLPTDA),” Progress In Electromagnetics Research M, vol. 21, January 2011. [Online]. Available: http://dx.doi.org/10.2528/PIERM11080109
A. Espinoza, F. C. Ordaz, E. Ugalde, and R. Femat, “Analysis of a model for the morphological structure of renal arterial tree: Fractal structure,” Journal of Applied Mathematics, vol. 2013, no. 12, July 2013. [Online]. Available: http://dx.doi.org/10.1155/2013/396486
F. N. Doubal and et al, “Fractal analysis of retinal vessels suggests that a distinct vasculopathy causes lacunar stroke,”Neurology, vol. 74, no. 14, April 6 2010. [Online]. Available: http://dx.doi.org/10.1212/WNL.0b013e3181d7d8b4
K. Bai, C. Meneveau, and J. Katz, “Near-wake turbulent flow structure and mixing length downstream of a fractal tree,”Boundary-Layer Meteorology, vol. 143, no. 2, May 2012. [Online]. Available: http://dx.doi.org/10.1007/s10546-012-9700-2
A. Díaz, A. Mosquera, J. L. Endrino, and P. Lafont, “Near-wake turbulent flow structure and mixing length downstream of a fractal tree,” Journal of Physics: Conference Series, vol. 252, no. 1, Dec 2010. [Online]. Available: http://dx.doi.org/10.1088/1742-6596/252/1/012003
A. Bartrés and et al, “Algorithm programming for 3D fractal dimension evaluation,” in 2016 Global Medical Engineering Physics Exchanges/Pan American Health Care Exchanges (GMEPE/PAHCE), Madrid, Spain, 2016, pp. 4–9.
S. Kobayashi, T. Maruyama, S. Tsurekawa, and T. Watanabe, “Grain boundary engineering based on fractal analysis for control of segregation-induced intergranular brittle fracture in polycrystalline nickel,” Acta Materialia, vol. 60, no. 17, October 2012. [Online]. Available: https://doi.org/10.1016/j.actamat.2012.07.065
K. K. Manesh, B. Ramamoorthy, and M. Singaperumal, “Numerical generation of anisotropic 3D non-Gaussian engineering surfaces with specified 3D surface roughness parameters,” Wear, vol. 268, no. 11, May 12 2010. [Online]. Available: https://doi.org/10.1016/j.wear.2010.02.005
X. L. Bin, X. Han, and S. Chen, “Fractal analysis of engineering ceramics ground surface,” Applied Surface Science, vol. 258, no. 17, June 15 2012. [Online]. Available: https://doi.org/10.1016/j.apsusc.2012.03.050
G. Serrano, “Diseño e Implementaciòn de un amplificador de audio en clase AB en un puente de baja potencia,” M.S. thesis, Escuela Técnica Superior Ingenierios Industriales Valencia, Universidad Politecnica de Valencia, Valencia, España, 2013.
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Revista Facultad de Ingeniería Universidad de Antioquia
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter