Implementation of the hydraulic modelling of urban drainage in the northeast sector, Tunja, Boyacá

Authors

DOI:

https://doi.org/10.17533/udea.redin.20200798

Keywords:

sewerage, SWMM model, hydrodynamic simulation

Abstract

Historically, in the city of Tunja there has been a phenomenon of occupation of the natural channels of rainwater, altering the hydrology of the natural basins. Currently, the city is experiencing considerable and accelerated urban development towards the northeast, which has resulted in overflows in the drainage system and floods that have affected residents. The current drainage system is not capable of registering the flow of water that leaves the urban sector due to a lack of instrumentation. In this study, precipitation and water flow equipment was installed in the northeastern district of the city, also known as barrio Santa Ines. The basin was separated into 56 different sub-basins with physical and drainage parameters calculated for each sub-basin. The associated parameters were calibrated to the initial hydrological losses and roughness. A validated and calibrated urban drainage model was created in the program SWMM 5.1, allowing for the temporal hydrodynamic modelling of the system to be obtained. The model reproduces the real evolution of the system and was used in order to make predictions according to a maximum precipitation design event. This model resulted in the detection of two areas that are vulnerable to flooding. The identification of different sub-basins and the desegregation of the hydrodynamic model resulted in a reduction in the uncertainty of the evolution of water flow in the system.

|Abstract
= 1506 veces | PDF
= 771 veces| | HTML
= 0 veces|

Downloads

Download data is not yet available.

Author Biographies

Melquisedec Cortés-Zambrano, Saint Thomas University

Civil Engineering, Msc in Civil Engineering, Ph.D Candidate in Engineering and Materials Science, Research Professor and Coordinator of the Hydro-environmental area of the Faculty of Civil Engineering.

Wilson Enrique Amaya-Tequia, Saint Thomas University

Sanitary Engineer, Master in Civil Engineering with emphasis on hydro-environmental, Full-Time Professor at the Faculty of Civil Engineering.

Dania Soraya Gamba-Fernández, Saint Thomas University

Engineering Civil, Student. Faculty of Civil Engineering.

References

C. L. Arnold and C. J. Gibbons, “Impervious surface coverage: The emergence of a key environmental indicator,” Journal of the American Planning Association, vol. 62, no. 2, 1996. [Online]. Available: https://doi.org/10.1080/01944369608975688

L. Yao, W. Wei, and L. Chen, “How does imperviousness impact the urban rainfall-runoff process under various storm cases?” Ecological Indicators, vol. 60, January 2016. [Online]. Available: https://doi.org/10.1016/j.ecolind.2015.08.041

A. I. Mejía and G. E. Moglen, “Spatial distribution of imperviousness and the spacetime variability of rainfall, runoff generation, and routing,” Water Resources Research, vol. 46, no. 7, July 2010. [Online]. Available: https://doi.org/10.1029/2009WR008568

“Urban drainage master plan, phase 1,” Veolia Water of Tunja, Tunja, Colombia, Tech. Rep., 2016.

J. Temprano and I. Tejero, “Detention storage volume for combined sewer overflow into a river,” Environmental Technology, vol. 23, no. 6, July 2002. [Online]. Available: https://doi.org/10.1080/09593332308618381

A. Múrcia, “Estudio de la cuenca de la Riereta en Sant Boi de Llobregat mediante un modelo de drenaje dual utilizando SWMM 5,” Ph.D. Dissertation, University Polytechnic of Catalunya, Barcelona, España, 2011.

Instruction Manual RainLog™ 2.0, Rain Wise, Trenton, NJ, USA, 2013.

Storm Water Management Model, Version 4, User’s Manual, U.S. Environmental Protection Agency, Athens, Georgia, 1988.

Storm Water Management Model User’s Manual Version 5.1, US Environmental Protection Agency, Cincinnati, USA, 2015.

N. Sun, M. H. P. Hall, B. Hong, and L. J. Zhang, “Impact of SWMM catchment discretization: Case study in Syracuse, New York,” Journal of Hydrologic Engineering, vol. 19, no. 1, January 2014. [Online]. Available: https://doi.org/10.1061/(ASCE)HE.1943-5584.0000777

J. L. Macor, “Análisis comparativo del parámetro ancho de cuenca del modelo RUNOFF–SWMM,” Ingeniería Hidráulica en Mexico, vol. 17, no. 2, pp. 17–26, Apr. 2002.

F. A. Digiano, D. D. Adrian, and P. Mangarella, “Short course proceedings applications of stormwater management models,” Environmental Protection Agency, Cincinnati, USA, Tech. Rep. EPA- 600/2-77-065, Mar. 1977.

Drenaje urbano y rural. Universidad Nacional del Litoral. Accessed Mar. 20, 2019. [Online]. Available: https://bit.ly/3eb7gUw

W. M. Alley and P. E. Smith, “Distributed routing rainfall-runoff model-version II,” U.S. Geological Survey, Reston, Virginia, USA, Tech. Rep. 82-344, 1982.

“Report and papers with guidelines on calibration of urban flood models,” University of Exeter, Exeter, UK, Tech. Rep., Aug. 2014.

Downloads

Published

2020-07-24

How to Cite

Cortés-Zambrano, M., Amaya-Tequia, W. E., & Gamba-Fernández, D. S. (2020). Implementation of the hydraulic modelling of urban drainage in the northeast sector, Tunja, Boyacá . Revista Facultad De Ingeniería Universidad De Antioquia, (101), 74–83. https://doi.org/10.17533/udea.redin.20200798