Comparison of debonding resistance and failure type of three orthodontic band cements
DOI:
https://doi.org/10.17533/udea.rfo.v28n1a5Keywords:
Dental cement, Orthodontic bands, DebondingAbstract
Introduction: the objective of this study was to compare the debonding resistance and failure type observed in three materials used for band cementation by means of the universal testing machine and a stereomicroscope. Methods: 72 third lower molars were collected from patients who needed extractions; metal bands were cemented on them with a pre-soldered tube and internal etching (Bracket USED, OrthoUSA, USA). The samples were randomly sorted out in three groups, forming a control group (zinc phosphate) and two pilot groups (resin-modified glass ionomer and polyacidmodified composite resin). All samples were subjected to a process of 2000 thermal cycles, and later to a debonding resistance test in the universal testing machine (Instron 3367 class 0.5, with 0-30 Kn load cell, USA) at a speed of 2 mm/min. The data were calculated in megapascals, taking into account the surface area of bands (mm2). Finally, to determine failure type, a visual inspection was conducted using a stereomicroscope (Stemi 2000C, Carl Zeiss, Göttingen, Germany AXIOCAM Carl Zeiss Microimaging, Göttingen, Germany). Results: no statistically significant differences were found among the three study groups in terms of debonding resistance (p value = 0.119). The most predominant failure type in the three cements occurred at the cemento-enamel interphase, with 61.1%, showing a statistically significant difference. Conclusion: zinc phosphate, resin-modified glass ionomer and polyacid-modified composite resin showed similar debonding resistance values and the most predominant failure type in the three band cementing
materials occurred at the cemento-enamel interface; however, the resin-modified glass ionomer showed a lower percentage.
Downloads
References
Hodges SJ, Gilthorpe MS, Hunt NP. The effect of micro-etching on the retention of orthodontic molar bands: a clinical trial. Eur J Orthod 2001; 23(1): 91-97.
Clark JR, Ireland AJ, Sherriff M. An in vivo and ex vivo study to evaluate the use of a glass polyphosphonate cement in orthodontic banding. Eur J Orthod 2003; 25(3): 319-323.
Millett D, Mandall N, Hickman J, Mattick R. Glenny AM. Adhesives for fixed orthodontic bands. A systematic review. Angle Orthod 2009; 79(1): 193-199.
Toledano M, Osorio R, Osorio E, Aguilera FS, Romeo A, de la Higuera B et al. Sorption and solubility testing of orthodontic bonding cements in different solutions. J Biomed Mater Res B Appl Biomater 2006; 76(2): 251-256.
Van de Sande FH, Silva AF, Michelon D, Piva E, Cenci MS, Demarco FF. Surface roughness of orthodontic band cements with different compositions. J Appl Oral Sci 2011; 19(3): 223-227.
Aguiar DA, Ritter DE, Rocha R, Locks A, Borgatto AF. Evaluación de las propiedades mecánicas de cinco cementos para cementación de bandas ortodónticas. Braz Oral Res 2013; 27(2): 136-141.
Williams PH, Sherriff M, Ireland AJ. An investigation into the use of two polyacid-modified composite resins (compomers) and a resin-modified glass poly (alkenoate) cement used to retain orthodontic bands. Eur J Orthod 2005; 27(3): 245-251.
Knox J, Chye KY, Durning P. An ex-vivo evaluation of resin-modified glass polyalkenoates and polyacid-modified composite resins as orthodontic band cements. J Orthod 2004; 31(4): 323-328.
Millett DT, Cummings A, Letters S, Roger E, Love J. Resin-modified glass ionomer, modified composite or conventional glass ionomer for band cementation?—an in vitro evaluation. Eur J Orthod 2003; 25(6): 609-614.
Sfondrini MF, Cacciafesta V, Noga E, Scribante A, Klersy C. In vitro bond strength evaluation of four orthodontic cements. J Adhes Dent 2010; 12(2): 131-135.
Caglaroglu M, Sukurica Y, HG Gurel, Keklik H. A comparison of shear bond strengths of six orthodontic cements. J Orthod 2014; 2(1): 17-20.
Guzmán HJ. Biomateriales odontológicos de uso clínico 5 ed. Bogotá: ECOE Ediciones; 2013. p. 51, 92-95.
Millett DT, Doubleday B, Alatsaris M, Love J, Wood D, Luther F, Devine D. Chlorhexidine-modified glass ionomer for band cementation? An in vitro study. J Orthod 2005; 32(1): 36-42.
Lacouture L, Mendoza J, Rivera R. Efectos del ciclaje térmico en la fuerza y tipo de falla adhesiva en esmalte humano. [Tesis de Posgrado [Bogotá]: Universidad Militar Nueva Granada – Fundación Centro de Investigación y Estudios Odontológicos CIEO; 2012. p.22.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2016 Revista Facultad de Odontología Universidad de Antioquia
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright Notice
Copyright comprises moral and patrimonial rights.
1. Moral rights: are born at the moment of the creation of the work, without the need to register it. They belong to the author in a personal and unrelinquishable manner; also, they are imprescriptible, unalienable and non negotiable. Moral rights are the right to paternity of the work, the right to integrity of the work, the right to maintain the work unedited or to publish it under a pseudonym or anonymously, the right to modify the work, the right to repent and, the right to be mentioned, in accordance with the definitions established in article 40 of Intellectual property bylaws of the Universidad (RECTORAL RESOLUTION 21231 of 2005).
2. Patrimonial rights: they consist of the capacity of financially dispose and benefit from the work trough any mean. Also, the patrimonial rights are relinquishable, attachable, prescriptive, temporary and transmissible, and they are caused with the publication or divulgation of the work. To the effect of publication of articles in the journal Revista de la Facultad de Odontología, it is understood that Universidad de Antioquia is the owner of the patrimonial rights of the contents of the publication.
The content of the publications is the exclusive responsibility of the authors. Neither the printing press, nor the editors, nor the Editorial Board will be responsible for the use of the information contained in the articles.
I, we, the author(s), and through me (us), the Entity for which I, am (are) working, hereby transfer in a total and definitive manner and without any limitation, to the Revista Facultad de Odontología Universidad de Antioquia, the patrimonial rights corresponding to the article presented for physical and digital publication. I also declare that neither this article, nor part of it has been published in another journal.
Open Access Policy
The articles published in our Journal are fully open access, as we consider that providing the public with free access to research contributes to a greater global exchange of knowledge.
Creative Commons License
The Journal offers its content to third parties without any kind of economic compensation or embargo on the articles. Articles are published under the terms of a Creative Commons license, known as Attribution – NonCommercial – Share Alike (BY-NC-SA), which permits use, distribution and reproduction in any medium, provided that the original work is properly cited and that the new productions are licensed under the same conditions.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
