Wind integrated time series load flow analysis for a practical distribution system

Keywords: Distribution Network, Load Flow Analysis, Distributed Energy Resources

Abstract

Wind is a clean source of energy which is naturally available and has been replacing the harmful non-perennial conventional power plants such as Thermal, Hydro, Nuclear etc., The innovation in design has gradually reduced the cost to set up a wind power plant. This has increased the penetration of wind energy in the Distribution Network (DN). Being a seasonal power generation, wind energy integration in the distribution network has created many challenging issues like voltage stability, system reliability and power system network stability. Hence a thorough analysis of wind energy integration is needed to make the power system network more stable. This paper describes the dynamic behavior of the distribution system while integrating wind energy through time series analysis. The load flow is performed using Newton-Raphson method, with a variable load profile. Time series analysis is done which gives the performance characteristics of the system which is validated in a practical IEEE 123 test feeder.

|Abstract
= 88 veces | PDF
= 96 veces|

Downloads

Download data is not yet available.

Author Biographies

Muruganantham Balakrishnan, Pondicherry Engineering College

Department of Electrical and Electronics Engineering.

 

 

Gnanadass Ramachadran, Pondicherry Engineering College

Department of Electrical and Electronics Engineering.

References

R. Billinton and H. Chen, “Assessment of risk-based capacity benefit factors associated with wind energy conversion systems,” IEEE Transactions on Power Systems, vol. 13, no. 3, pp. 1191–1196, 1998.

I. Cadirei and M. Ermiş, “Performance evaluation of a wind driven doig using a hybrid model,” IEEE Transactions on Energy Conversion, vol. 13, no. 2, pp. 148–155, 1998.

A. E. Feijoo and J. Cidras, “Modeling of wind farms in the load flow analysis,” IEEE transactions on power systems, vol. 15, no. 1, pp. 110–115, 2000.

V. M. Quezada, J. R. Abbad, and T. G. S. Román, “Assessment of energy distribution losses for increasing penetration of distributed generation,” IEEE Transactions on Power Systems, vol. 21, no. 2, p. 533, 2006.

L. F. Ochoa and G. P. Harrison, “Minimizing energy losses: Optimal accommodation and smart operation of renewable distributed generation,” IEEE Transactions on Power Systems, vol. 26, no. 1, pp. 198–205, 2011.

L. de Magalhães Carvalho, M. A. d. Rosa, A. M. L. d. Silva, and V. Miranda, “Probabilistic analysis for maximizing the grid integration of wind power generation,” IEEE Transactions on Power Systems, vol. 27, no. 4, pp. 2323–2331, 2012.

C. Opathella, B. N. Singh, D. Cheng, and B. Venkatesh, “Intelligent wind generator models for power flow studies in pss® e and pss® sincal,” IEEE Transactions on Power Systems, vol. 28, no. 2, pp. 1149–1159, 2013.

J. B. Cardell and C. L. Anderson, “A flexible dispatch margin for wind integration,” IEEE Transactions on Power Systems, vol. 30, no. 3, pp. 1501–1510, 2015.

C.-L. Nguyen and H.-H. Lee, “Effective power dispatch capability decision method for a wind-battery hybrid power system,” IET Generation, Transmission & Distribution, vol. 10, no. 3, pp. 661–668, 2016.

J. W. Choi, S. Y. Heo, and M. K. Kim, “Hybrid operation strategy of wind energy storage system for power grid frequency regulation,” IET Generation, Transmission & Distribution, vol. 10, no. 3, pp. 736–749, 2016.

H. Zhao, Q. Wu, Q. Guo, H. Sun, and Y. Xue, “Optimal active power control of a wind farm equipped with energy storage system based on distributed model predictive control,” IET Generation, Transmission & Distribution, vol. 10, no. 3, pp. 669–677, 2016.

V. M. Da Costa, N. Martins, and J. R. L. Pereira, “Developments in the newton raphson power flow formulation based on current injections,” IEEE Transactions on Power Systems, vol. 14, no. 4, pp. 1320–1326, 1999.

C. Fuerte-Esquivel, E. Acha, and H. Ambriz-Perez, “A comprehensive newton-raphson upfc model for the quadratic power flow solution of practical power networks,” IEEE Transactions on Power Systems, vol. 15, no. 1, pp. 102–109, 2000.

F. Milano, “Continuous newton’s method for power flow analysis,” IEEE Transactions on Power Systems, vol. 24, no. 1, pp. 50–57, 2009.

F. Mumtaz, M. Syed, M. Al Hosani, and H. Zeineldin, “A novel approach to solve power flow for islanded microgrids using modified newton raphson with droop control of dg,” IEEE Transactions on Sustainable Energy, vol. 7, no. 2, pp. 493–503, 2016.

A. Petersson, Analysis, modeling and control of doubly-fed induction generators for wind turbines. Chalmers University of Technology, 2005.

D. Aliprantis, S. Papathanassiou, M. Papadopoulos, and A. Kladas, “Modeling and control of a variable-speed wind turbine equipped with permanent magnet synchronous generator,” in Proc. of ICEM, vol. 3, 2000, pp. 558–562.

D. T. Feeders, “IEEE PES distribution system analysis subcommittee,” Available online: http://www.ewh.ieee.org/soc/pes/dsacom/testfeeders/index.html, 2011.

Published
2017-12-07
How to Cite
Balakrishnan M., & Ramachadran G. (2017). Wind integrated time series load flow analysis for a practical distribution system. Revista Facultad De Ingeniería Universidad De Antioquia, (85), 33-39. https://doi.org/10.17533/udea.redin.n85a04