Preparation and characterization of Mg-modified zirconias as catalysts for the direct synthesis of dimethyl carbonate (DMC)
DOI:
https://doi.org/10.17533/udea.redin.14639Keywords:
sol-gel process, zirconia, basic sites, dimethyl carbonate, CO2-TPDAbstract
In this work sol-gel zirconia was prepared using H2SO4, HNO3 or HCl as hydrolysis catalysts. Basic and acid sites of synthesized zirconia materials were characterized by XRD, BET, FTIR, CO2- TPD and NH3-TPD. FTIR spectra and TGA confirmed the presence of sulfate in the structure of samples prepared with H2SO4 as hydrolysis catalyst. Different molar ratios of Mg were incorporated by co-gellation on selected zirconia materials in order to improve their basic properties. Mg loading was determined by elemental analysis. The resulting materials were tested for the direct synthesis of dimethyl carbonate (DMC) from methanol and CO2. The addition of Mg to zirconia samples prepared with HCl as hydrolysis catalyst increased their CO2adsorption capacity between 100 and 200°C. However, methanol conversions on these samples were lower than over unmodified zirconia samples.
Downloads
References
Y. Ono. “Dimethyl carbonate for environmentally benign reactions”. Catalysis Today. Vol. 35. 1997. pp. 15-25. DOI: https://doi.org/10.1016/S0920-5861(96)00130-7
M. A. Pacheco, C. L. Marshall. “Review of Dimethyl Carbonate (DMC) Manufacture and its Characteristics as a Fuel Additive”. Energy Fuel. Vol. 11. 1997. pp. 2-29. DOI: https://doi.org/10.1021/ef9600974
D. Delledonne, F. Rivetti, U. Romano. “Developments in the production and application of dimethyl carbonate”. Applied Catalysis A: General. Vol. 221. 2001. pp. 241-251. DOI: https://doi.org/10.1016/S0926-860X(01)00796-7
J. Ma, N. Sun, X. Zhang, N. Zhao, F. Xiao, W. Wei, Y. Sun. “A short review of catalysis for CO2 conversion”. Catalysis Today. Vol. 148. 2009. pp. 221-231. DOI: https://doi.org/10.1016/j.cattod.2009.08.015
J. Biana, M. Xiao, S. Wang, X. Wang, Y. Meng. “Highly effective synthesis of dimethyl carbonate from methanol and carbon dioxide using a novel coppernickel/ graphite bimetallic nanocomposite catalyst”. Chemical Engineering Journal. Vol. 147. 2009. pp. 287-296. DOI: https://doi.org/10.1016/j.cej.2008.11.006
A. Khalid. “Synthesis of dimethyl carbonate (DMC) from methanol and CO2 over Rh-supported catalyst”. Catalysis Communications. Vol. 10. 2009. pp. 1127- 1131. DOI: https://doi.org/10.1016/j.catcom.2009.01.012
K. Tomishige, Y. Ikeda, T. Sakaihori, K. Fujimoto. “Catalytic Properties and Structured of Zirconia Catalysts for Direct Synthesis of DMC from Methanol and Carbon Dioxide”. Journal of Catalysis. Vol. 192. 2000. pp. 355-362. DOI: https://doi.org/10.1006/jcat.2000.2854
K. T. Jung, A. T. Bell. “Effects of Catalyst phase structure on the elementary processes involved in the synthesis of dimethyl carbonate from metanol and carbon dioxide over zirconi ”. Topics in Catalysis. Vol. 20. 2002. pp. 97-105.
K. T. Jung, A. T. Bell. “An in Situ Study of Dimethyl Carbonate Synthesis from Carbon Dioxide and Methanol over Zirconia”. Journal of Catalysis. Vol. 204. 2001. pp. 339-347. DOI: https://doi.org/10.1006/jcat.2001.3411
A. Liu, K. Nyavor, Z. Li, N. O. Egiebor. “Effects of composition and calcination temperatura on morphology and structure of barium modified zirconia nanoparticles”. Materials Science and Engineering. Vol. 366. 2004. pp. 66-73. DOI: https://doi.org/10.1016/j.msea.2003.08.048
C. Montes de Correa, L. M. Martínez, J. A. Odriozola, M. A. Centeno. “Synthesis and characterization of solgel zirconia supported Pd and Ni catalysts”. Catalysis Today. Vol. 107-108. 2005. pp. 800-808. DOI: https://doi.org/10.1016/j.cattod.2005.07.012
X. Bokhimi, A. Morales, O. Novaro, T. López, R. Gómez. “The effect of hydrolysis initiator on the phase formation in sulfated sol-gel zirconia”. Polyhedron. Vol. 19. 2000. pp. 2283-2287. DOI: https://doi.org/10.1016/S0277-5387(00)00490-3
A. Liu, K. Nyavor, R. Ankumah. “Strtuctural and Adsorptive properties of Ba or Mg oxide modified zirconia”. Journal of Colloid and Interface Science. Vol. 284. 2005. pp. 66-70. DOI: https://doi.org/10.1016/j.jcis.2004.09.034
K. T. Jung, A. T. Bell. “The effect of synthesis and pretreatment conditions on the bulk structure and surface properties of zirconia”. Journal of Molecular Catalysis A: Chemical. Vol. 163. 2000. pp. 27-42. DOI: https://doi.org/10.1016/S1381-1169(00)00397-6
S. Liu, X. Zhang, J. Li, N. Zhao, W. Wei, Y. Sun.“Preparation and application of stabilized mesoporous MgO-ZrO2 solid base”. Catalysis Communications. Vol. 9. 2008. pp. 1527 1532. DOI: https://doi.org/10.1016/j.catcom.2007.12.007
L. Castro, P. Reyes, C. Montes de Correa. “Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts”. Journal of Sol-Gel Science and Technology. Vol. 25. 2002. pp. 159-168. DOI: https://doi.org/10.1023/A:1019920531309
K. Tomishige, Y. Ikeda, T. Sakaihori, K. Fujimoto. “A novel method of direct synthesis of dimethyl carbonate from methanol and carbon dioxide catalyzed by zirconia”. Catalysis Letters. Vol. 58. 1999. pp. 225- 229. DOI: https://doi.org/10.1023/A:1019098405444
Ganapati D. Yadav, Jayesh J. Nair. “Sulfated zirconia and its modified versions as promising catalysts for industrial processes”. Microporous and Mesoporous Materials. Vol. 33. 1999. pp. 1-48. DOI: https://doi.org/10.1016/S1387-1811(99)00147-X
L. E. Davies, N. A. Bonini, S. Locatelli, E. E. Gonzo. “Characterization and catalytic activity of zirconium dioxide prepared by sol-gel”. Latin American Applied Research. Vol. 35. 2005. pp. 23-28.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Revista Facultad de Ingeniería
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.