Equipment for the treatment of melts via mechanical vibrations
DOI:
https://doi.org/10.17533/udea.redin.344369Keywords:
vibratory equipment, eccentric table, acceleration, solidificationAbstract
The present paper describes the assembly of a vibrating equipment. This system has a single degree of freedom and viscous absorption. The vibrations are generated by an eccentric revolving table. The equipment comprises an a.c. motor (Pn = 2,2 Kw, I= 165 A, n = 17.000 r.p.m.), a mechanical vibrating unit, a VLT 5008 Danfoss frequency converter, a Kw 3072 HBM measurement intensifier, an oscilloscope, a B12/1000 HOTTINGER BALOWIN MESS TECHNIK accelerometer, cast iron table, rubber supports. The equipment generates mechanical vibrations which applied to the liquid alloys during solidification alter the solidification conditions and improve the mechanical, tribological, physical and chemical properties of the respective alloys.
Downloads
References
Braszczynski, I. “Mecanisme de l’influence des vibrations sur la cristallisation des alliages de fonderie”. En: Memoires et etudes scientifiques, Revue de metallurgie. Janvier, 1983.
Cămui, C. “Cercetări privind influenţa tratamentelor fizico-mecanice asupra solidificării pieselor turnate”. Teză de doctorat. Bucureşti, 1997.
Fisher, T. P. Effects of vibrational energy on solidification
Harris, C. M. y Crede, C. E. Şocuri şi vibraţii. Vol. I. Editura Tehnică şi Pedagogică Bucureşti. 1968.
Huţiu, G. “Studii şi cercetări privind folosirea materialelor recuperabile pentru obţinerea aliajelor antifricţiune pe bază de Sn, fără Cd şi As”. Teză de doctorat. Timişoara, 2003.
Leger, M. y Breynaert, J. Affinement du grain de solidification par vibration mecanique. Fonderie. Fevrier, 1997.
Ion, R. “Utilizarea vibraţiilor în procesul de prelucrare mecanică”. Teză de doctorat. Cluj, 1993.
Rădoi, M. Elemente de vibraţii mecanice. Editura Tehnică Bucureşti, 1973.
Ştefănescu, F. “Cercetări privind dirijarea proceselor de solidificare ale aliajelor turnate în piese”. Teză de doctorat. Bucureşti, 1989.
Wclaw. S. et.al. “Effect of a rotative reversing magnetic field on the solidification of aluminum castings”. En: Giesserei Forschung. N.° 1. 1988.
Downloads
Published
How to Cite
Issue
Section
License
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter