Use and effect of fly ash in concrete: A literature review
DOI:
https://doi.org/10.17533/udea.redin.20230927Keywords:
Concrete, mechanical properties, cement, resistance, environmental impactAbstract
Concrete production is characterized by a significant demand for energy and raw materials. The construction, maintenance, and demolition of engineering works cause excessive polluting waste that requires costly disposal. For this reason, alternative reusable materials that improve the mechanical properties of concrete, such as fly ash, are currently being investigated as an effective solution to reduce problems related to environmental impact. This paper analyzed 80 articles indexed in different databases such as ScienceDirect, IOPscience, Scielo, Ebsco, Scopus, SpringerLink, ProQuest, Dialnet, and Semanticscholar, which were not older than seven years since publication, to conduct an updated systematic review of the use, effect, and influence of fly ash on concrete. The methodologies and designs used to obtain the optimum percentages of 5, 10, and 15% were reviewed, analyzing mainly the results obtained when fly ash is used in concrete. Finally, according to the review carried out, it was concluded that fly ashes improve the mechanical and physical characteristics of concrete, and that the optimum dosage is 10% in substitution of ordinary Portland cement applied in simple concrete.
Downloads
References
B. Thomas, K. S. Chithra, A. Harismitha, A. R. Kunnath, and D. Mohan, “A study on strength properties of fly ash and ground granulated blast furnace slag based geopolymer concrete,” Grenze International Journal of Engineering & Technology (GIJET), vol. 6, no. 2, pp. 186–190, 2020.
S. Trinugroho and R. Septia-Ningrum, “Optimum compressive strength of geopolymer concrete in variations comparison of ingredients and mixing time,” presented at 7th International Conference on Engineering, Technology, and Industrial Application, Indonesia, 2020. [Online]. Available: https://doi.org/10.1088/1742-6596/1858/1/012054
N. F. A. Jamaludin, K. Muthusamy, M. F. M. Jaafar, R. P. Jaya, and M. A. Ismail, “Performance of palm oil clinker lightweight aggregate concrete comprising spent garnet as fine aggregate replacement,”Advances in Civil Engineering, vol. 2022, Apr. 13, 2022. [Online]. Available: https://doi.org/10.1155/2022/9674096
J. A. Lizcano-Cabeza, L. F. Ávila Ascanio, C. A. Ríos-Reyes, and L. Y. Vargas-Fiallo, “Efecto del proceso de fusión y envejecimiento en la síntesis de zeotipos a partir de cenizas volantes,” Revista Facultad de Ingeniería, Universidad de Antioquia, no. 74, Mar. 2015. [Online]. Available: https://doi.org/10.17533/udea.redin.16484
P. R. de Matos, R. Junckes, and L. R. Prudencio-Jr., “Influence of the use of fly ash on the adiabatic heat evolution and compressive strength of concretes,” Revista Matéria, vol. 24, no. 2, Jan. 18, 2019. [Online]. Available: https://doi.org/10.1590/S1517-707620190002.0674
S. Zhang, B. Chen, B. Tian, X. Lu, B. Xiong, and et al., “Effect of fly ash content on the microstructure and strength of concrete under freeze–thaw condition,” Buildings, vol. 12, no. 12, Dec. 01, 2022. [Online]. Available: https://doi.org/10.3390/buildings12122113
M. Czop, B. Lazniewska-Piekarczyk, and M. Kajda-Szczesniak, “Evaluation of the immobilization of fly ash from the incineration of municipal waste in cement mortar incorporating nanomaterials—a case study,” Energies, vol. 15, no. 23, Nov. 29, 2022. [Online].Available: https://doi.org/10.3390/en15239050
G. Turuallo and H. Mallisa, “Using cementitious materials such as fly ash to replace a part of cement in producing high strength concrete in hot weather,” in International Symposium on Materials, Metallurgy, and Chemical Engineering, Bali, Indonesia, 2017. [Online]. Available: https://doi.org/10.1088/1757-899X/316/1/012039
S. A. Chandio, B. A. Memon, M. Oad, F. A. Chandio, and M. U. Memom, Effect of fly ash on the compressive strength of green concrete,”Engineering, Technology & Applied Science Research, vol. 10, no. 3,Jun. 2020. [Online]. Available: https://doi.org/10.48084/etasr.3499
M. C. Rueda-Gualdrón, K. M. Vega-Núñez, and C. A. Ríos-Reyes, “Effect of the use nickeliferous laterite and pumice as additives in the performance and durability of the portland cement,” Revista Facultad de Ingeniería, Universidad de Antioquia, no. 79, Jun. 17, 2016. [Online]. Available: https://doi.org/10.17533/udea.redin.n79a15
S. Prakash, T. Thenmoshi, S. N. Raman, and C. Subramanian, “Fibre reinforced concrete containing waste coconut shell aggregate, fly ash and polypropylene fibre,” Revista Facultad de Ingeniería, Universidad de Antioquia, no. 94, Oct. 17, 2020. [Online]. Available: https://doi.org/10.17533/udea.redin.20190403
J. Sun, X. Shen, G. tan, and J. E. Tanner, “Compressive strength and hydration characteristics of high-volume fly ash concrete prepared from fly ash,” Journal of Thermal Analysis and Calorimetry, no. 136, Aug. 16, 2018. [Online]. Available: https://doi.org/10.1007/s10973-018-7578-z
R. T. Desai and N. R. Parmar, “Performance enhancement of fine fly ash and pond ash material in self compacted concrete,” Grenze International Journal of Engineering & Technology (GIJET), vol. 6, no. 1, pp. 111–117, Jan. 2020.
X. Yu and J. Li, “Properties of concrete containing fly ash and temperature control measures used during construction,” in International Conference on Civil and Hydraulic Engineering, 2019. [Online]. Available: https://doi.org/10.1088/1755-1315/304/5/052003
U. M. Muthaiyan and S. Thirumalai, “Studies on the properties of pervious fly ash–cement concrete as a pavement material,”Cogent Engineering, vol. 4, no. 1, Apr. 27, 2017. [Online]. Available: https://doi.org/10.1080/23311916.2017.1318802
I. Khan, A. Castel, and R. I. Gilbert, “Effects of fly ash on early-age properties and cracking of concrete,” ACI Materials Journal, vol. 114, no. 4, Jul. 2017. [Online]. Available: https://doi.org/10.14359/51689898
A. K. Saha, “Effect of class f fly ash on the durability properties of concrete,” Sustainable Environment Research, vol. 28, no. 1, Sep. 21, 2017. [Online]. Available: https://doi.org/10.1016/j.serj.2017.09.001
B. Basa, N. Pradhan, and L. P. Parhi, “Mechanical properties of concrete with sintered fly ash aggregate as substitute of natural fine aggregate,” in Online National Conference on Sustainable Material and Practices for Infrastructure Development, 2020. [Online]. Available: https://doi.org/10.1088/1757-899X/970/1/012013
L. Mahajan and S. Bhagat, “Effect of fly ash and bottom ash on the ratio of splitting tensile strength to compressive strength of concrete,” in International Conference on Recent Innovations in Engineering and Technology (ICRIET 2020), Tamil Nadu, India, 2020. [Online]. Available: https://doi.org/10.1088/1757-899X/1070/1/012032
D. T. Bach, V. L. Hoang, and N. B. Nguyen, “Pelletized fly ash aggregates use for making eco-friendly concrete,” in Modern Building Materials, 2020. [Online]. Available: https://doi.org/10.1088/1757-899X/869/3/032028
T. Castaño-Cardoza, S. Linsel, A. A. Diaz, R. Orozco-Morales, and J. F. Martirena-Hernández, “Influence of very fine fraction of mixed recycled aggregates on the mechanical properties and durability of mortars and concretes,” Revista Facultad De Ingeniería, Universidad De Antioquia, vol. 81, Dec. 02, 2016. [Online]. Available: https://doi.org/10.17533/udea.redin.n81a08
D. Zhanga, P. Han, Q. Yang, and M. Mao, “Shrinkage effects of using fly ash instead of fine aggregate in concrete mixtures,” Advances in Materials Science and Engineering, vol. 2020, Apr. 09, 2020. [Online]. Available: https://doi.org/10.1155/2020/2109093
E. Haustein and A. Kurylowicz-Cudowska, “The effect of fly ash microspheres on the pore structure of concrete,” Minerals, vol. 10, no. 1, Jan. 09, 2020. [Online]. Available: https://doi.org/10.3390/min10010058
P. K. D. Maeijer, B. Craeye, R. Snellings, H. Kazemi-Kamyab, M. Loots, and et al., “Effect of ultra-fine fly ash on concrete performance and durability,” Construction and Building Materials, vol. 263, Oct. 13, 2020. [Online]. Available: https://doi.org/10.1016/j.conbuildmat.2020.120493
M. Harihanandh and M. Sivaraja, “Strength and mechanical properties of nano fly ash concrete,” International Journal of Advanced Engineering Technology, vol. 7, no. 2, Apr-Jun. 2016. [Online]. Available: https://tinyurl.com/477tczvr
G. Kate and S. B. Thakare, “An experimental study of high strength-high volume fly ash concrete for sustainable construction industry,” presented at IOP Conference Series Materials Science and Engineering, College, India, 2017. [Online]. Available: https://doi.org/10.1088/1757-899X/225/1/012247
A. K. Ibrahim and Z. M. A. Hussein, “Improvement the properties of high strength fly ash based geopolymer concrete by using cement,” presented at International Conference on Materials Engineering and Science, Istanbul, Turkey, 2018. [Online]. Available: https://doi.org/10.1088/1757-899X/454/1/012155
G. S. Harsha and B. Binimol, “Performance evaluation of high volume fly ash concrete,” i-Manager’s Journal on Structural Engineering, vol. 5, no. 2, Jun-Aug. 2016. [Online]. Available: http://tinyurl.com/u4xphw
S. B. Ankesh, G. K. Bharat, M. Bibek, G. D. C. Gowda, H. V. Devaraja, and et al., “Study on compressive strength of concrete by using fly ash and nanosilica,” International Research Journal of Engineering and Technology (IRJET), vol. 7, no. 7, Jul. 2020. [Online]. Available:https://www.irjet.net/archives/V7/i7/IRJET-V7I7901.pdf
Triwulan, K. A. Priadana, J. Ekaputri, and R. Bayuaji, “Physical and chemical character of fly ash of coal fired power plant in java,” presented at International Conference of Applied Science and Technology for Infrastructure Engineering, East Java, Indonesia, 2017. [Online]. Available: https://doi.org/10.1088/1757-899X/267/1/012003
C. Van-Nguyen, P. Lambert, and Q. Hung-Tran, “Effect of Vietnamese fly ash on selected physical properties, durability and probability of corrosion of steel in concrete,” materials, vol. 4, no. 593, Feb. 16, 2019. [Online]. Available: https://doi.org/10.3390/ma12040593
A. Wardhon, “Flowability and strength properties of high volume of fly ash material on self-compacting concrete,” Conference (MISEIC) 2020 3 October 2020, Surabaya, Indonesia, 2021.
J. Matarul, M. A. Mannan, N. Yussop, M. Z. Endut, and A. Ibrahim, “Optimising concrete enhancement of local ready-mix concrete partially replaced with local fly-ash,” International Conference on Nanomaterials: Science, Engineering and Technology (ICoNSET), Penang Island, Malaysia, 2019.
W. Chung-Hao, H. Chung-Ho, K. Yu-Cheng, and Y. Tsong, “Effects of fineness and dosage of fly ash on the fracture properties and strength of concrete,” applied sciences, vol. 9, no. 11, May. 31, 2019. [Online]. Available: https://doi.org/10.3390/app9112266
A. M. Najmi, A. K. Mariyana, P. N. Shek, and Z. Nurizaty, “Hardened properties of concrete with different proportion of crumb rubber and fly ash,” 4th International Conference on Construction and Building Engineering & 12th Regional Conference in Civil Engineering, Langkawi, Malaysia, 2020.
J. A. Canul, E. I. Moreno, and J. M. Mendoza-Rangel, “Fly ash effect on mechanical properties of concretes made with high absorbent crushed limeston aggregates,” Revista ALCONPAT, vol. 6, no. 3, Sep-Dic. 31, 2016. [Online]. Available: https://doi.org/10.21041/ra.v6i3.150
S. Huaquisto-Cáceres and G. Belizario-Quispe, “Utilización de la ceniza volante en la dosificación del concreto como sustituto del cemento,” Revista de Investigaciones Altoandinas, vol. 20, no. 2, May-Jun. 2018. [Online]. Available: http://dx.doi.org/10.18271/ria.2018.366
M. Mujiburrakhman and S. Widodo, “Study on partial replacement of sand with fly ash in concrete mixes based on pozzolanic cementing efficiency to the strength-weight and cost-strength ratio,” 2nd International Conference on Sustainable Infrastructure 28, Yogyakarta-Indonesia, 2020.
K. Usanova and Y. G. Barabanshchikov, “Cold-bonded fly ash aggregate concrete,” Magazine of Civil Engineering, vol. 95, no. 3, May-Jun. 2020. [Online]. Available: https://doi.org/10.18720/MCE.95.10
A. Szcześniak, J. Zychowicz, and A. Stolarski, “Influence of fly ash additive on the properties of concrete with slag cement,”Materials, vol. 13, no. 15, Jul. 20, 2020. [Online]. Available: https://doi.org/10.3390/ma13153265
G. Bejan and M. Bărbuţă, “Investigation of the effects of fly ash on mechanical proprieties of polymer concrete,” Bulletin of the Polytechnic Institute of Iasi-Construction & Architecture Section, vol. 69, no. 2, Apr. 12, 2019. [Online]. Available: http://tinyurl.com/bdz5r6c7
S. R. U. Sivasankaran and S. Nallusamy, “Experimental analysis of mechanical properties on concrete with nano silica additive,” Journal of Nano Research, vol. 57, Apr. 2019. [Online]. Available: https://doi.org/10.4028/www.scientific.net/JNanoR.57.93
V. W. Y. Tam, K. N. Le, A. C. Evangelista, A. Butera, C. N. N. Tran, and A. Teara, “Effect of fly ash and slag on concrete: Properties and emission analyses,” Frontiers of Engineering Management, vol. 6, Mar. 02, 2019. [Online]. Available: https://doi.org/10.1007/s42524-019-0019-2
M. Solikin, K. O. M. Oraibi, and Y. Nurchasanah, “The utilization of fly ash in mix proportion of self-consolidation concrete,” 2017 1st International Conference on Engineering and Applied Technology (ICEAT), Mataram, Indonesia, 2017.
M. Rauf-Shaker, M. Bhalala, Q. Kargar, and B. Chang, “Evaluation of alternative home-produced concrete strength with economic analysis,” Sustainability, vol. 12, no. 17, Aug. 18, 2020. [Online]. Available: https://doi.org/10.3390/su12176746
Y. Silva and S. Delvasto, “Concreto autocompactante con diferentes niveles de ceniza volante y escoria de combustión de carbón,”Revista colombiana de materiales, no. 5, 2014. [Online]. Available: https://doi.org/10.17533/udea.rcm.19249
A. Fauzi, M. Fadhil-Nuruddin, A. B. Malkawi, and M. M. Al-Bakri-Abdullah, “Study of fly ash characterization as a cementitious material,” Procedia Engineering, vol. 148, Jul. 12, 2016. [Online]. Available: https://doi.org/10.1016/j.proeng.2016.06.535
M. Rendón-Belmonte, M. Martínez-Madrid, R. V. Martínez-Pérez,and J. T. Pérez-Quiroz, “Durability of concrete mixtures with different contents of activated fly ash,” Revista Alconpat, vol. 9, no. 2, Sep. 19, 2020. [Online]. Available: https://doi.org/10.21041/ra.v9i2.313
D. Marcon-Neto, C. Effting, A. Schackow, I. R. Gomes, G. Aurélio-Cifuentes, and D. Ganasini, “Thermomechanical behavior of high-volume fly ash concretes,” ACI Materials Journal, vol. 5, no. 117, Sep. 2020. [Online]. Available: https://doi.org/10.14359/51725783
C. How-Ji, S. Neng-Hao, W. Chung-Hao, and L. Shu-Ken, “Effects of the loss on ignition of fly ash on the properties of high-volume fly ash concrete,” Sustainability, vol. 11, no. 9, May. 13, 2019. [Online]. Available: https://doi.org/10.3390/su11092704
M. Talha-Junaid, A. Khennane, and O. Kayali, “Performance of fly ash based geopolymer concrete made using non-pelletized fly ash aggregates after exposure to high temperatures,” Materials and Structures, vol. 48, Aug. 26, 2014. [Online]. Available: https://doi.org/10.1617/s11527-014-0404-6
Y. Patrisia, R. Coenraad, N. A. Inderawan, and E. Elidad, “Mechanical properties of fly ash-based geopolymer concrete using variation in maximum size of coarse aggregate,” International Conference on Innovation In Research, Bali, Indonesia, 2020.
C. Sondakh and S. Gumalang, “The processing, properties and optimum mix of fly ash based - self compacting geopolymer concrete,” The 3rd International Conference on Civil and Environmental Engineering (ICCEE 2019), Bali, Indonesia, 2020.
P. Shinde, S. Patankar, and A. Sayyad, “Investigation on effects of fineness of flyash and alkaline ratio on mechanical properties of geopolymer concrete,” Research on Engineering Structures & Materials, vol. 4, May. 15, 2017. [Online]. Available: http://dx.doi.org/10.17515/resm2017.01ma0119
A. R. Dar, “Advanced performance of fly ash co-mixtured self-compacting concrete” First International Conference on Materials Science and Manufacturing Technology, Tamil Nadu, India, 2019.
S. A. Kristiawan, Sunarmasto, and M. M. Ridlo, “Sorptivity of self-compacting concrete with high volume fly ash and its eco-mechanical-durability performance,” FIB Conference: Sustainable Concrete: Materials and Structures, Malta, 2018.
E. G. Velichko, “Self-compacting concrete with tpp fly ash,” International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering (MPCPE 2020), Vladimir, Russian Federation, 2020.
K. Zielinski1 and P. Witkowski, “Analysis of the impact of fly ashes on the structure of scc concrete aeration,” IOP Conference Series: Materials Science and Engineering, Vladimir, Russian Federation, 2019.
S. C. Gnanaraj, R. B. Chokkalingam, G. L. Thankam, and S. K. M. Pothinathan, “Influence of steatite and fly ash on the fresh-hardened properties and micromorphology of self-compacting concrete,” Advances in Materials Science and Engineering, Apr. 01, 2021. [Online]. Available: https://doi.org/10.1155/2021/6627450
S. Jagalur-Mahalingasharma, P. Prakash, K. Vishwanath, and V. Jawali, “Effect of mineral admixtures on kinetic property and compressive strength of self compacting concreteg,” The 2nd International Conference on Civil Engineering and Materials Science, Korea, 2017.
J. Abellán-García, N. Torres-Castellanos, J. Fernández-Gómez, and A. Núñez-López, “Ultra-high-performance concrete with local high unburned carbon fly ash,” DYNA, vol. 88, no. 216, May. 24, 2021. [Online]. Available: https://doi.org/10.15446/dyna.v88n216.89234
J. Chen, L. Li, G. Wu, M. Zhou, T. Jiang, Q. Pu, and et al., “Study on the effect of fly ash and polycarboxylic acid water reducer on the properties of recycled concrete,” International Conference on Civil, Architecture and Disaster Prevention 1, China, 2018.
M. Amin and B. Abdelsalam-Abdelsalam, “Efficiency of rice husk ash and fly ash as reactivity materials in sustainable concrete,”Sustainable Environment Research, vol. 29, no. 30, Nov. 2019.[Online]. Available: https://doi.org/10.1186/s42834-019-0035-2
J. Chen, L. Li, G. Wu, M. Zhou, T. Jiang, Q. Pu, and et al., “Research on influences of fly ash content on mechanical properties of shotcrete,”IOP Conference Series: Materials Science and Engineering, 2018.
S. Takibai, K. Sakanov, and D. Sungidmaa, “Analysis of radio activity and thermal decomposition of fly ash for application in light concrete production,” XIII International Scientific Conference Architecture and Construction, Novosibirsk, Russia, 2020.
R. Karolina and F. Muhammad, “The analysis of mechanical properties of non autoclaved aerated concrete with the substitution of fly ash and bottom ash,” Conference on Engineering, Science and Technology, Indonesia, 2018.
L. Xiao, J. Li, and Q. Liu, “Effect of fly ash on strength of cinder lightweight aggregate concrete,” 4th International Conference on Applied Materials and Manufacturing Technology, Nanchang, China, 2018.
A. Kumar and R. Rathore, “Design and experimental investigation on high strength concrete using flyash and silica fume,” International Journal of Scientific & Engineering Research, vol. 8, no. 5, May. 2017. [Online]. Available: http://tinyurl.com/32dhejby
J. Yu, C. Lu, C. K. Leung, and G. Li, “Mechanical properties of green structural concrete with ultrahigh-volume fly ash,” Sustainable Environment Research, vol. 147, Apr. 06, 2017. [Online]. Available: https://doi.org/10.1016/j.conbuildmat.2017.04.188
F. Yunusova and S. Djabbarova, “Fly ash of thermal power plant - micro fill for hydro technical concrete,” International Scientific Conference Construction Mechanics, Hydraulics and Water Resources Engineering, Tashkent, Uzbekistan, 2020.
E. Rommel, L. Prasetyo, Y. Rusdianto, R. Karimah, A. Riyanto, and S. A. N. Cahyo, “The insulation properties of foam concrete with the use of foam-agent and fly-ash,” 3rd International Conference on Engineering and Applied Technology (ICEAT), Sorong, Indonesia, 2019.
F. Monika, H. Prayuda, M. Dwi-Cahyati, E. Nurmala-Augustin, H. A. Rahman, and et al., “Engineering properties of concrete made with coal bottom ash as sustainable construction materials,” Civil Engineering Journal, vol. 8, no. 1, Dec. 16, 2021. [Online]. Available: http://tinyurl.com/zaad3mnx
H. Xargay, M. Ripani, A. Caggiano, P. Folino, and E. Martinelli, “Uso de materiales reciclados en compuestos cementicios,” Universidad Distrital Francisco José de Caldas, vol. 23, no. 60, Apr. 2019. [Online]. Available: https://doi.org/10.14483/22487638.14697
J. Cárdenas-Pulido, J. Lizarazo-Marriaga, and W. Aperador-Chaparro, “Comportamiento mecánico de sistemas cementantes binarios (cemento portland - ceniza volante – escoria de alto horno),” Revista Latinoamericana de Metalurgia y Materiales, vol. 36, no. 1, 2016. [Online]. Available: http://tinyurl.com/3mcmf68f
M. Lamine-Zeggar, N. Azline, and N. Azizi-Safiee, “Analysis of radio activity and thermal decomposition of fly ash for application in light concrete production,” Sustainable Civil and Construction Engineering Conference, Kuala Lumpur, Malaysia, 2019.
W. A. Bautista-Ruiz, M. Díaz-Lagos, and S. A. Martínez-Ovalle, “Caracterización de las cenizas volantes de una planta termoeléctrica para su posible uso como aditivo en la fabricación de cemento,” Revista de Investigación, Desarrollo e Innovación, vol. 8, no. 1, 2016. [Online]. Available: https://doi.org/10.19053/20278306.v8.n1.2017.7374
H. Trong-Phuoc, N. Si-Huy, and H. C.-L. Hwang, “Physical-durable performance of concrete incorporating high loss on ignition-fly ash,” International Conference on Materials Engineering and Applications, Bali, Indonesia, 2018.
D. E. Angulo-Ramírez, W. G. Valencia-Saavedra, and R. M. de Gutiérrez, “Concretos álcali-activados basados en cenizas volantes y escoriassiderúrgicas de alto horno: resistencia a compresión, absorción de agua y permeabilidad a cloruros,” Ingeniería e Investigación, vol. 40, no. 2, 2020. [Online]. Available: http://dx.doi.org/10.15446/ing.investig.v40n2.83893
G. S. J. Saravanan and Anandarakrishnan, “A comparative study of fly ash concrete,” IUP Journal of Structural Engineering, vol. 12, no. 2, 2019. [Online]. Available: http://dx.doi.org/10.15446/ing.investig.v40n2.83893
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Revista Facultad de Ingeniería Universidad de Antioquia
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter