Soldabilidad del acero de refuerzo estructural para aplicaciones sismoresistentes fabricado por SIMESA
DOI:
https://doi.org/10.17533/udea.redin.325796Abstract
Se presentan los resultados de los ensayos de soldabilidad de las barras de refuerzo estructural termotratadas de Simesa (ASTM A 706 Grado 70), en las especificaciones 10, 8, 6 y 4, según las normas Structural Welding Code AWS Dl.4 y AWS Dl.1. La soldadura utilizada corresponde a un electrodo E-9018-G de la Messer Griesheim. Los ensayos indican que sin ningún control de temperatura se cumplen los requisitos de las normas A WS. Es necesario un control de temperatura de interpases a un máximo de 150° C, la utilización de electrodos de 3.25 mm de diámetro y de un amperaje máximo de 120 A por pase para garantizar que la unión soldada cumpla la Norma ICONTEC NTC 2289 para barra de refuerzo estructural.
Downloads
References
AGUILAR, Yesid y ARROYO, R. Soldadura de aceros nacionales para refuerzo de concreto. Jornadas de Metalurgia y Tecnología de la Soldadura. Cali,, Julio (1985)
American Standard of Testing Materials. ASTM A -706.
American Welding Society. ANSI/A WS DI .4-92 Structural Welding Code. Reinforcing Steel, 4th Ed.
CADENA, A. Soldabilidad de barras corrugadas de acero de baja aleación y termotratadas para concreto reforzado en construcciones de diseño sismoresistente, producida por siderúrgica Hornos Nacionales S.A., bajo Norma NTC 2289. Tesis de Grado. Universidad Pedagógica y Tecnológica de Colombia. Facultad de Ingeniería. 1994.
Código Colombiano de Construcciones Sismoresistentes. Decreto 1400 de Junio de 1884.
CONTRERAS, J. Soldadura de las varillas estructurales nacionales de alta resistencia. Universidad Nacional. Ingeniería e Investigación. (1984)
DEFOURNY, J. and BRAGARD, A. TEMPCORE-Process, the Solution to Rebar Welding Problems. C.R.M. No. 50 Apr (1977).
DEFOURNY, J. and BRAGARD, A. Guide forthe Weldingand WeldabilityofReinforcing Steels for concrete structures. Welding in the World. Vol. 24. No. 11-12 UK ( 1986)
EASTERLING, K. lntroduction to the Physical Metallurgy of Welding. Butterworth
Heinemann 2nd Ed., 1992 p: 263
ECHAVARRIA, A., Y SEGURO, R. Soldabilidad del acero de refuerzo estructural para aplicaciones sismoresistentes fabricado por SIMESA. Universidad de Antioquia. Departamento de Ingeniería Metalúrgica y Materiales. Febrero de 1997 DOI: https://doi.org/10.17533/udea.redin.325796
ICONTEC. C. Código para calificar el procedimiento de soldar·y la habilidad del soldador. Norma ICONTEC 2057. (1986)
ICONTEC. Norma NTC 2289. Norma para barra de acero de refuerzo estructural.
Integral S.A. Especificaciones de soldadura de barra de refuerzo estructural No. 6 en acero
ASTM A706 Grado 60, fabricado por SIMESA. Medellín. (1994)
LEY 400 DE 1997 -DECRETO 33 DE 1998. NORMA SISMORESISTEMTE NSR 98.
Topar 500 S. Instructions de soudage.
Downloads
Published
How to Cite
Issue
Section
License
Revista Facultad de Ingeniería, Universidad de Antioquia is licensed under the Creative Commons Attribution BY-NC-SA 4.0 license. https://creativecommons.org/licenses/by-nc-sa/4.0/deed.en
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The material published in the journal can be distributed, copied and exhibited by third parties if the respective credits are given to the journal. No commercial benefit can be obtained and derivative works must be under the same license terms as the original work.
Twitter